Whirlpool Agitator thrust washer WP3951608, Replaces 3951608

Genuine Whirlpool agitator thrust washer, also described as a thrust spacer or spacer-thrust. It fits between the upper and lower agitator sections and supports the agitator auger during operation.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Upper agitator appears stuck or moves sluggishly while the lower agitator operates.
• Reduced or ineffective agitation.
• Unusual rubbing, grinding, or squealing noise from the agitator area.

Check Before Replacing

• Unplug the washer before inspection.
• With the agitator accessible, visually inspect the thrust washer for cracking, deformation, excessive thinning, or missing sections.
• Check that the washer is seated in its intended position between the agitator sections and that the upper agitator is not binding against the lower section.
• Inspect the related agitator cam/dogs for visible wear at the same time; these components can produce similar agitation symptoms.
• After reassembly, observe a short empty wash cycle for proper upper- and lower-agitator movement and unusual noise.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM part.
• Also described as a thrust spacer, spacer-thrust, or agitator cam in some catalog taxonomies.
• Fits between the upper and lower agitator sections.
• Supports the agitator auger and helps reduce friction between moving agitator components.
• Replaces previous Whirlpool number 3951608.

Installation Notes

• Disconnect electrical power before servicing.
• Access the agitator assembly according to the washer's service or installation documentation.
• Remove the agitator assembly and install the thrust washer in the same location and orientation as the original; repair guidance places it on the lower agitator beneath the upper section.
• Ensure the washer is seated correctly before reconnecting the agitator sections.
• Reassemble the agitator securely and verify movement during an empty test cycle.
• Use the appliance-specific service documentation if the agitator design differs from the illustrated procedure.

Verified Compatible Models

2DLSQ7533JQ3, 2DLSQ8000JQ0, 2DLSQ8000JQ3, 3RGSC9455JQ0, 3RGSC9455JQ1, 3RGSC9455JQ2, 3RGSC9455JQ3, 3RLSQ8000JQ0, 3RLSQ8000JQ1, 3RLSQ8000JQ2, 3RLSQ8000JQ3, 3RLSQ8533JQ0, 3RLSQ8533JQ1, 3RLSQ8533JQ2, 3XGSC9455JQ2

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.