Range Burner Won't Turn Off or On? Control Knob WP7733P410-60 — Fix It Fast
A burner that won't respond to the knob is a safety hazard — and in most cases, the knob itself is the culprit. In Whirlpool, Maytag, and KitchenAid gas ranges, the burner control knob is a high-wear component that cracks, strips, or loses its detent feel over time. When it fails, the burner may not ignite, won't shut off cleanly, or spins freely with no resistance. ⚡ Common failure point in Whirlpool-built gas ranges. Part WP7733P410-60 is the genuine OEM stainless steel replacement that restores precise burner control and eliminates unsafe knob play.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Your range powers on and other burners work normally
- ✔ The igniter clicks but the affected burner won't light — or the knob spins without engaging
- ✔ Gas supply to the range is confirmed OK
- ✔ The ONLY problem is the knob feels loose, stripped, or won't hold a position
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Knob spins freely or feels loose with no click stops
- Burner won't ignite when knob is turned to LITE
- Knob won't stay in the OFF position
- Knob is cracked, melted, or the indicator mark is worn off
✔ If these symptoms match, the control knob is the most likely failed component.
✔ In most cases, replacing this knob restores full burner control immediately — no tools required.
📦 Part Details
- Part Number: WP7733P410-60
- Type: OEM Stainless Steel Burner Control Knob
- Replaces: 74007733, 7733P410-60, WP7733P410-60VP
- Brands: Whirlpool, Maytag, KitchenAid, Jenn-Air
If the knob shaft is worn or the valve stem is damaged, the burner valve itself may need replacement. Check the valve stem for play or gas smell before reassembly — replacing both at the same time saves a second service call.
⚙️ Installation
Skill Level: EASY — Under 5 minutes. Disconnect power and shut off gas before servicing. Pull the old knob straight off the valve stem — no screws required. Align the D-shaped shaft on the new knob and press firmly until it seats. Restore power and gas, then test all positions.
✓ Compatible Models
Confirmed compatible with JGC8430BDB, JGC8430BDS, JGC8430BDW, JGC8536ADB, JGC8536ADQ, JGC8536ADS, JGC8536ADW, JGC9430ADB, JGC9430ADF, JGC9430ADS, JGC9536ADB, JGC9536ADF, JGC9536ADS, JGC9536BDB, JGC9536BDF, JGC9536BDR, JGC9536BDS, JGD8430ADB, JGD8430ADB14, JGD8430ADF, JGD8430ADF15, JGD8430ADN15, JGD8430ADS, JGD8430ADS14, KGCD807XBL00, KGCD807XSS00 plus additional Whirlpool-platform models. Contact us to verify your model number before ordering.
💡 Pro Tip
If one knob has failed, the others are the same age and under the same heat stress. Replacing the full set now costs less than a second service call later — and gives your range a consistent, like-new look across all burners.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
