Whirlpool Dishwasher Water Level/Float Switch WPW10195039, Replaces W10734532, W10195039

Genuine Whirlpool OEM dishwasher water-level/float switch. It is float-actuated overfill protection that monitors dishwasher water level and stops filling when an excessive level is detected.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Dishwasher does not fill with water
• Dishwasher overfills or continues filling
• Water-inlet operation is interrupted because the float is held up
• Incorrect water-level sensing may contribute to abnormal cycle operation

Check Before Replacing

• Disconnect electrical power before inspecting the switch or accessing the lower dishwasher area.
• Confirm the float moves freely through its full travel and is not obstructed by utensils, debris, mineral buildup, or a misaligned component.
• Visually inspect the switch, actuator/lever, wiring connectors, and surrounding area for looseness, damage, or signs of water intrusion.
• With power disconnected and the switch isolated as required by the appliance service procedure, check switch continuity while manually moving the float or actuator; compare the result with the appliance-specific technical documentation.
• If the switch tests correctly, do not assume it is the cause; also check related fill-system components such as the inlet valve, wiring, and control circuit using the model-specific service information.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM dishwasher water-level/float switch
• Float-actuated safety device intended to help prevent overfilling
• Used in the dishwasher fill-control/safety circuit
• Whirlpool manufacturer part number WPW10195039
• Replaces archived Whirlpool numbers W10195039 and W10734532

Installation Notes

• Disconnect electrical power by unplugging the dishwasher or switching off its circuit breaker before service.
• Access the switch according to the appliance-specific service instructions; the switch is commonly located in the lower right-side area of applicable dishwasher designs.
• Transfer the wiring to the replacement switch in the same positions as the original and ensure connectors are fully seated.
• After installation, verify that the float and actuator move freely and that no wiring is pinched before restoring power.
• Confirm the replacement against the dishwasher model and the old part before installation; physical layout and access can vary by model.

Verified Compatible Models

2213092N413, 2213099N413, 2213222N414, 2213229N414, 2213473N413, 2213479N413, 2213802N710, 2213803N710, 2213804N710, 2213809N710, 2214502N020, 2214523N611, 2214545N711, 2214573N612, 2214743N513, 2214792N512, 2214793N512, 2214815N612, 2217382N710, 2217383N710, 2217389N710, 66213012K112, 66213013K112, 66213014K112, 66213019K112, 66213023K112, 66213032K112, 66213033K112, 66213039K112, 66213042K112, 66213043K112, 66213044K112

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.