THE ASSOCIATED DUAL SURFACE ELEMENT DOES NOT HEAT
Whirlpool Range Dual electronic surface-element control switch / infinite switch, 2200 W WPW10215034, Fixes The associated dual surface element does not heat
Genuine Whirlpool OEM dual surface-element control switch for electric cooktops and ranges. The switch controls the element on/off operation and heat level. Documented specifications identify it as a dual electronic switch for a 2200-watt element; one distributor identifies application to an 8-inch element at 240 volts and 10.5 amps.
Part WPW10215034Replaces W10215034Whirlpool
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberWPW10215034
ReplacesW10215034
ManufacturerWhirlpool
Appliance TypeRange
Part TypeDual electronic surface-element control switch / infinite switch, 2200 W
✅ Cross Reference Information
Current Part NumberWPW10215034
ReplacesW10215034
Common Symptoms
- The element will not heat.
- The element remains on high or does not regulate heat correctly.
- The inner or outer heating zone cannot be controlled independently.
Check Before Replacing
- Confirm the cooktop/range has electrical power and that the circuit breaker has not tripped.
- With power disconnected at the breaker, inspect the control knob, switch shaft, and visible wiring/connectors for looseness, scorching, melting, or other damage.
- Compare the affected control's operation with another similar surface-element control, without bypassing or shorting any wiring.
- Verify the appliance model and the switch position/application before condemning the switch; other causes can produce similar heating symptoms.
Pro Tip
Because dual-element switches can be position-specific, verify the appliance model, burner position, terminal arrangement, and old-part markings before ordering or installing the replacement.
Part Details
Part NumberWPW10215034
Part TypeDual electronic surface-element control switch / infinite switch, 2200 W
ManufacturerWhirlpool
Appliance TypeRange
Primary FunctionControls on/off operation and heat level for a dual radiant surface element, including its inner and outer heating zones.
Installation Notes
- Disconnect electrical power to the cooktop/range at the circuit breaker before installation.
- Use protective work gloves when handling the component and surrounding cooktop parts.
- Follow the appliance-specific service information for access, wire identification, terminal placement, and reassembly.
- Restore power only after the switch and all electrical connections are fully secured.
- If access requires lifting or removing a glass cooktop, use the appliance service procedure and obtain assistance as needed.
Verified Compatible Models
JED3430WB00, JED3430WB01, JED3430WF00, JED3430WF01, JED3430WS00, JED3430WS01, JED3536WB00, JED3536WB04, JED3536WF00, JED3536WF01, JED3536WF03, JED3536WF04, JED3536WS01, JED3536WS03, JED3536WS04
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
