Refrigerator Water Cloudy or Flow Restricted? Manifold Filter Assembly WR01F04947 – Restore Clean Water Fast

If your GE refrigerator is producing cloudy water, reduced water flow, poor-tasting ice, or the water dispenser is sluggish, the manifold filter assembly is the most likely cause. In GE refrigerators, the WR01F04947 manifold filter assembly controls water routing and filtration through the dispenser and ice maker system — when it fails or becomes clogged, water flow drops, ice quality degrades, and dispenser performance suffers. ⚡ A common service item in GE refrigerators with built-in water and ice dispensers. Part WR01F04947 is the genuine OEM replacement that restores full water flow, filtration performance, and ice maker operation immediately.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Refrigerator powers on and cooling functions are normal
• ✔ Water supply line to the refrigerator is confirmed connected and pressurized
• ✔ Ice maker and water dispenser are otherwise functional (not a valve or control issue)
• ✔ Issue is isolated to water flow, water quality, or ice quality — not a freezer temperature problem
• ✔ ONLY problem is reduced flow, cloudy water, poor taste, or dispenser sluggishness

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Water dispenser flow is slow or barely trickling — most common complaint
• Water tastes off or has an unusual odour
• Ice cubes are cloudy, small, or have an off taste
• Ice maker producing less ice than normal
• Water appears discoloured or has visible particles
• Filter change indicator light on despite recent filter replacement

✔ If these symptoms match, this is the most likely failed component in the system.

✔ In most cases, replacing the manifold filter assembly restores full water and ice performance immediately.

📦 Part Details

• Part Number: WR01F04947
• Type: Refrigerator Manifold Filter Assembly — OEM direct fit, water routing and filtration assembly
• Replaces: OEM direct-fit manifold filter assembly (no modification required)
• Brand: GE (General Electric)

⚙️ Installation Notes

Skill Level: MODERATE — 20–30 minutes. Disconnect power to the refrigerator and shut off the water supply line before beginning. Locate the manifold filter assembly inside the refrigerator — typically behind the rear interior panel or in the filter housing area depending on model. Disconnect the water line fittings and mounting hardware, remove the old assembly, and install the new WR01F04947 in reverse order. Restore water supply and power, then run several dispenser cycles to purge air and confirm full flow before use.

💡 Pro Tip

✓ Model-Specific Repair Pages