GE Fridge Door Leaking or Sweating? Mullion Assembly WR03F04420 – Fix Door Condensation Fast

If your GE French door refrigerator has condensation forming at the center door gap, warm air leaking between the doors, or a mullion that sticks, drags, or won’t pivot correctly, the mullion articulation assembly is the most likely cause. In most GE-built French door and bottom-freezer refrigerators, the mullion’s plastic hinge mechanism cracks or warps over time from repeated door cycling. When it fails, the center seal breaks down — warm humid air enters the cabinet, condensation builds on the mullion and door edges, and energy consumption rises. ⚡ Common failure point in GE GNE, GFE, GWE, GYE, CWE, and XNE series refrigerators. Part WR03F04420 is the genuine OEM replacement that restores proper mullion pivot action and door sealing with a direct-fit installation requiring no modification.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Your refrigerator powers on and cools normally
• ✔ The door gaskets on both doors are intact and not torn or compressed
• ✔ The door hinges are aligned — doors open and close without binding
• ✔ The problem is specifically at the center mullion, not the outer door edges
• ✔ ONLY problem is condensation, air leakage, or mullion misalignment at the center divider

Not sure? Send us your model number — we’ll confirm before you order.

🔧 Common Symptoms

• Condensation or moisture forming on the mullion or center door edges — most common search
• Warm air entering refrigerator through the center door gap
• Mullion not pivoting or flexing correctly when doors open and close
• Mullion sticking, dragging, or visibly misaligned
• Ice or frost buildup at the center of the refrigerator door opening
• Increased energy consumption or compressor running constantly

✔ If these symptoms match, this is the most likely failed component in the system.

✔ In most cases, replacing this mullion articulation assembly restores proper door sealing immediately.

📦 Part Details

• Part Number: WR03F04420
• Type: Refrigerator mullion articulation assembly — hinged center divider mechanism for French door models
• Replaces: OEM direct-fit assembly — supersedes WR17X25027, 225D8303G002 (no modification required)
• Brands: GE, GE Profile, GE Café, Hotpoint

⚙️ Installation Notes

Skill Level: MODERATE — 20–40 minutes. Unplug the refrigerator before beginning. Open both doors and locate the mullion assembly on the center divider between the two door openings. Remove the mounting screws securing the old assembly, disconnect any wiring harness if present, and pull the assembly free. Seat the new mullion articulation assembly, reconnect any wiring, and reinstall the mounting screws. Open and close both doors several times to verify the mullion pivots smoothly and the center seal closes flush before plugging the unit back in.

💡 Pro Tip

See model hub pages for full fitment and parts diagrams: GYE18JBLAFTS, GFE24JGKFFBB, XNE25JSKNFSS, GYE18JSLNFSS, GWE19JSLPFSS, GFE24JSKNFSS, GNE27JYMKFFS, GNE27ESMKFSS, GFE26JSMAFSS, GNE25JSKFFSS, CWE19SP4NNW2, QNE27JSMAFSS, GNE25JMKNFES, GNE27JSMNFSS, CNE25SSKAKSS.

✓ Model-Specific Repair Pages