GE Valve 2-1 (Washer Water Inlet Valve) WW01F01881, Replaces 189D5366P006, WH13X10064, WH13X27314

Is This the Right Part?

✅ Cross Reference Information

189D5366P006, WH13X10064, WH13X27314, WW03F00100

Common Symptoms

• Slow or restricted filling
• No water entering through one valve path
• Water continuing to seep into the tub when the washer is off
• Water leakage around the inlet-valve or hose connections

Check Before Replacing

• Confirm the household water supply valves are fully open.
• Inspect both inlet hoses for kinks, blockage, or incorrect connection.
• Check the valve inlet screens for visible debris without damaging or removing them unnecessarily.
• Observe whether water enters during the appropriate fill portion of a cycle; absence of flow does not by itself prove the valve is defective.
• If access is required, disconnect electrical power and shut off the water supply before inspecting the valve or its connections.

Pro Tip

Part Details

Installation Notes

• Verify that the replacement valve’s part number, port arrangement, electrical connectors, and hose connections match the removed component and the appliance model documentation.
• Shut off the water supply and disconnect electrical power before service.
• Disconnect hoses carefully and contain residual water to reduce spill risk.
• Reconnect each hose and electrical connector to its original position; do not force mismatched connections.
• After installation, restore water and power gradually and check all valve and hose connections for leaks during a fill test.

Verified Compatible Models

Fitment reminder: Verified compatibility is maintained by the XPart Model Hub Network. Match the complete appliance model number before ordering.