Whirlpool Washer Water inlet valve, hot W11220205, Replaces W10921516, WPW10240947, W10240947

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Washer fills slowly or does not fill when hot water is requested.
• Incorrect wash-water temperature when the hot-water supply is not entering properly.
• Water entering the washer when it is not in use if the inlet valve does not close fully.

Check Before Replacing

• Unplug the washer before inspection and verify that the household hot-water faucet is fully open and has adequate water pressure.
• With the water supply shut off, inspect the hot-water hose and the valve's hose-connection screen for kinks, debris, or mineral buildup; clean only as appropriate without damaging the screen.
• Confirm the hot-water hose is connected to the hot-water supply and the washer's hot inlet connection before attributing a temperature or fill problem to the valve.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power and shut off the washer water supply before servicing the valve.
• Reconnect the hot-water hose to the hot-water inlet connection; Whirlpool installation guidance identifies the hot connection with a red ring.
• Do not use tape or sealant on washer inlet-hose connections, and do not overtighten couplings.
• After reconnection, restore the water supply and check the hose/valve connection for leaks.

Verified Compatible Models

11028002010, 11028002011, 11028002012, 11028012010, 11028012011, 11028012012, MVWX600BW0, WTW5840BC0, WTW5840BW0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.