Whirlpool Range Short oven temperature sensor kit 12001655, Replaces 04000051, 12001356, 12001555, 74002625, 74003094, 74003413, 74004470, 74004944, 74005192, 7430P001-60, 7430P002-60, 7430P004-60, 7430P007-60, 7430P007-

Genuine Whirlpool short oven temperature sensor kit for ranges. The sensor is approximately 3 inches long, measures oven temperature, and includes harness adapters for applicable installations.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Oven does not reach the selected temperature
• Oven temperature fluctuates or is consistently too high or too low
• Temperature-sensor fault code
• Oven heating may stop or behave irregularly when the control receives an abnormal sensor signal

Check Before Replacing

• Disconnect electrical power before inspecting the sensor or its wiring.
• With power disconnected, inspect the sensor body, connector, harness adapters, and wiring for visible damage, looseness, corrosion, or pinched wires.
• If the appliance-specific technical documentation provides a resistance specification, measure the sensor across its terminals with the sensor disconnected; Whirlpool range service documentation commonly specifies approximately 1000–1200 ohms at room temperature, but the model-specific documentation should control.
• If the sensor resistance is normal, inspect the wiring path and connections before attributing the symptom to the sensor; the sensor test alone does not prove that the sensor is the cause.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM short oven temperature sensor kit
• Approximately 3 inches long
• Includes multiple or two harness adapters for applicable installations
• Designed to measure oven-cavity temperature
• Distinct from the longer 6-inch sensor kit 12001656

Installation Notes

• Disconnect electrical power before service and allow the oven to cool completely.
• Use the model-specific installation instructions and confirm that the replacement sensor has the same short length and mounting arrangement as the removed part.
• Route and secure the sensor wiring so it is not pinched, contacting hot surfaces, or exposed to the oven cavity beyond the intended sensor location.
• Connect the appropriate included harness adapter only as specified for the appliance; do not modify wiring unless the appliance-specific instructions explicitly require it.
• After reassembly, restore power and verify operation according to the appliance documentation; a temperature-sensor replacement does not by itself confirm that other heating or control components are functional.

Verified Compatible Models

34HY3TKXW, 34HY3TKXWON, 38FA5TXW, 38FA42TXW, 38FK4TXW, 38FN6TVWEV, 54FN5TKVWM, 64HK4TKXW, 3448XPA, 3448XRW, 6498VVV, 6498XTS, 7458XRW, 7498VAV, 7498VRA

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.