The drive belt on a Maytag top-load washer connects the motor to the transmission and pump — driving both agitation and spin. When it stretches, cracks, or snaps, the motor runs but the drum doesn’t move, the washer won’t drain, or you get a burning rubber smell during the cycle. The 12112425 is the OEM pump and drive belt set (2-pack, 1/2” wide × 42-1/2” long) for Maytag, Amana, Admiral, Magic Chef, and Norge top-load washers, replacing 12112425VP, W10175481, 211124, 211125, 210024, 22002570, 22002571, and WP211125. Available in OEM and XPart premium options.
⚠️ Symptoms This Part Fixes
- Washer won’t agitate — motor runs but drum doesn’t move
- Washer won’t spin or spins very weakly
- Washer fills with water but won’t drain
- Drum turns freely by hand but motor runs without moving it
- Burning rubber smell during or after a cycle
- Squealing or slipping noise from the motor area
- Visible belt debris or rubber fragments inside the washer cabinet
✓ Part Details
- OEM Part Number: 12112425
- Replaces: 12112425VP, W10175481, 210024, 211124, 211125, 22002570, 22002571, WP211125, D2-11125-2X, N2-11125-2D, 2-11124-4B
- Belt Specs: 1/2” wide × 42-1/2” long
- Quantity: 2-pack (pump belt + drive belt)
- Compatible Brands: Maytag, Amana, Admiral, Magic Chef, Norge
- Application: Top-load washing machines
- Available Options: OEM and XPart premium
- Ships From: Canada
Once the back panel is off and the belt is removed, the motor coupler and pump are fully accessible — and they wear on the same timeline as the belt. A cracked or worn motor coupler will cause the same no-agitate, no-spin symptoms even after a new belt is installed. Spin the pump impeller by hand: any roughness or resistance means the pump is on its way out. Replacing all three during one repair eliminates a repeat service call within months and saves your customer the labour cost of opening the washer again.
⚙️ Installation Notes
- Skill Level: Intermediate — requires removing the back panel to access the motor and belt
- First Step: Unplug the washer before beginning any work
- Access: Remove the back panel — the motor, pump, and belt are accessible from the rear on most Maytag top-load models
- Belt Removal: Release the motor mount spring to relieve tension, then slip the old belt off the motor pulley and pump pulley
- Belt Installation: Route the new belt around the pump pulley first, then the motor pulley — reinstall the motor mount spring to tension
- After Install: Rotate the drum by hand to confirm the belt is seated correctly before reassembling the back panel
- Test: Run a short agitate-and-spin cycle before pushing the washer back into position
✓ Compatible Models
Fits Maytag, Amana, Admiral, Magic Chef, and Norge top-load washing machines including: LAT1910AAL, LAT1910AAW, LAT2200AAE, LAT2300AAE, LAT2300AWW, LAT2500AAE, LAT2600AAE, LAT2910AAL, LAT2910AAW, LAT3500AAE, LAT3600AAE, LAT3910AAL, LAT3910AAW, LAT4910AAL, LAT4910AAW, LAT5000AAL, LAT5000AAW, LAT5000ABL, LAT5000ABW, LAT5910AAL, LAT5910AAW, LAT6910AAL, LAT6910AAW, LAT7300AAL, LAT7300AAW, LAT7300ABL, LAT7300ABW, LAT7400AAL, LAT7400AAW, LAT7500AAL, LAT7500AAW, LAT7800AAL, LAT7800AAW, LAT8100AAL, LAT8100AAW, LAT8200AAL, LAT8200AAW, LAT8420AAL, LAT8420AAW, LAT8500AAL, LAT8500AAW, LAT8520AAL, LAT8520AAW, LAT8600AAL, LAT8600AAW, LAT8640AAL, LAT8640AAW, LAT8650AAL, LAT8650AAW, LAT8700AAL, LAT8700AAW, LAT8800AAL, LAT8800AAW, LAT8820AAL, LAT8820AAW, LAT8840AAL, LAT8840AAW, LAT9200AAL, LAT9200AAW, LAT9280AAL, LAT9280AAW, LAT9300AAL, LAT9300AAW, LAT9400AAL, LAT9400AAW, LAT9593AAL, LAT9593AAW, LAT9600AAL, LAT9600AAW, LAT9700AAL, LAT9700AAW, LAT9800AAL, LAT9800AAW, LAT9900AAL, LAT9900AAW, LAW7500AAL, LAW7500AAW, LAW9400AAL, LAW9400AAW, LAW9700AAL, LAW9700AAW, MAT10CSAAL, MAT10CSAAW, MAT10DAAAL, MAT10DAAAW, MAT11PDAAL, MAT11PDAAW, MAT12CSAAL, MAT12CSAAW, MAT12PDAAL, MAT12PDAAW, MAT13MNAAW, MAT13PDAAW, MAT23PCAAL, MAT23PCAAW, MAT25CSAAL, MAT25CSAAW, MAT25DAAAL, MAT25DAAAW, MAT25MNAAL, MAT25MNAAW, MAT26MNAAL, MAT26MNAAW, MAT26PCAAL, MAT26PCAAW, LSE7800, LSE9900, LSG7800, LSG9900, SE1000, SE7800, SE9900, SG1000, SG7800, SG9900. Don’t see your model? Contact us and we’ll confirm compatibility before you order.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
