Frigidaire Washer Drain Hose 134592700, Replaces 134049200

Genuine Frigidaire 90-inch (7-1/2 ft.) washing-machine drain hose with a 90-degree rubber elbow; it directs discharged water to the household drain and is also documented in laundry-center literature as a drain-hose extension kit.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Water leaking onto or beneath the floor during drain or spin
• Washer drains slowly or does not drain when the hose is kinked, obstructed, or damaged
• Drain water misses the standpipe or laundry tub if the hose is not securely retained
• Hose visibly split, cracked, punctured, or disconnected

Check Before Replacing

• With the washer unplugged, visually inspect the full hose length for splits, cracks, punctures, crushing, or sharp kinks.
• Check both hose connections for looseness, partial separation, or signs of water leakage.
• Confirm the hose is not obstructed and that the household standpipe or drain is not clogged.
• Verify that the formed end is securely retained in the standpipe or laundry tub and cannot pull out during operation.
• After any correction, restore utilities according to the appliance instructions and observe a short drain or spin operation for leaks; stop if water leaks or the hose shifts.

Pro Tip

Part Details

Key Features

• Genuine Frigidaire OEM drain hose
• 90 inches (7-1/2 feet) long
• Formed 90-degree rubber elbow for routing
• Used on compatible Frigidaire washers and laundry centers
• Replaces prior manufacturer number 134049200

Installation Notes

• Disconnect electrical power before service and shut off the washer water supply before accessing the hose.
• Place towels or a suitable container to catch residual water when disconnecting the old hose.
• Route the replacement hose through the appliance cabinet as required by the model-specific service or installation instructions, keeping it clear of kinks and sharp bends.
• Secure the hose at the drain location so it cannot pull out from water flow or washer vibration.
• Ensure the hose is fully seated and retained at the washer connection, then check for leaks after reassembly.

Verified Compatible Models

970-C48112-10, BTF1240FS0, BTF1240FS1, CFLE1011MW0, CFLE1011MW1, CFLE1011MW2, CFLE2022MW0, CFLE2022MW1, CFLE2022MW2, CFW2000FW0, CFW2000FW1, CFW2000FW2, CLCE500FW0, CLCE500FW1, CLCE500FW2, CLCE500FW4, CLCE500MW1, CLCE900FW0, CLCE900FW1, CLCE900FW2, CLCG500FW0, CLCG500FW1, CLCG500FW3, CLCG500FW5, CLCG900FW0, CLCG900FW1, CLCG900FW2, CLCG900FW3, CTF140FS0, CTF140FS1, CTF140FS2, CTW100FW0, CTW100FW1, ELTW20XAKW0, FAHE1011MW0, FAHE4044MW0, FAHE4045QW0, FAHE4045QW1, FCCW2000LS0, FCCW3000FS0, FCCW3000FS1, FCCW3000FS2, FCCW3000FS3, FCCW3000FS4, FEX831FS0, FEX831FS1, FEX831FS2, FEX831FS4, FEZ831CFS0, FEZ831CFS1

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.