DISHWASHER WILL NOT START BECAUSE THE CONTROL DOES NOT DETECT A LATCHED DOOR
Midea Dishwasher door latch with switch assembly 17476000000048, Fixes Dishwasher will not start because the control does not detect a latched door
Genuine Midea dishwasher door latch/door switch assembly. The component controls the dishwasher safety circuit when the door is closed and latched. A documented manufacturer description identifies the assembly as door switch assembly; retailer listings also describe it as a door latch with switch.
Part 17476000000048Midea
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part Number17476000000048
ManufacturerMidea
Appliance TypeDishwasher
Part TypeDishwasher door latch with switch assembly
✅ Cross Reference Information
Current Part Number17476000000048
Common Symptoms
- Dishwasher will not latch
- Dishwasher will not start
- Dishwasher controls may remain inactive when the door is closed
- Dishwasher may stop mid-cycle if the latch switch signal is intermittent
- Door may be difficult to open, close, or latch properly
Check Before Replacing
- With power disconnected, inspect the latch and surrounding door area for visible damage, obstruction, or misalignment.
- Confirm that the door closes fully and engages the latch without excessive force.
- If qualified and equipped for appliance electrical testing, check the latch microswitch for continuity with power disconnected; do not bypass the safety switch.
- Inspect the switch wiring and connectors for looseness, damage, or corrosion without applying force to the terminals.
Pro Tip
Before replacing the assembly, check door alignment and the latch strike area for obstructions; a misaligned door can prevent the switch from being fully actuated and mimic a failed latch.
Part Details
Part Number17476000000048
Part TypeDishwasher door latch with switch assembly
ManufacturerMidea
Appliance TypeDishwasher
Primary FunctionInterlocks the dishwasher door and closes the safety-switch circuit when the door is properly latched, allowing operation to start and continue.
Installation Notes
- Disconnect electrical power before servicing the dishwasher.
- Verify the replacement part number and connector arrangement against the removed assembly before installation.
- Avoid bypassing or defeating the door-safety switch.
- After installation, confirm that the door latches securely and that the dishwasher recognizes the closed door before normal operation.
Verified Compatible Models
MDT24H3AST, CS14EFSBK1RCM, MDT24H2AST, MDT24P5AST, MDT24P4AST
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
All brand names are the property of their respective owners and are used for compatibility reference only.
