Whirlpool Washer Agitator Assembly 285565, Replaces 3951744, WP3951744, 3352106, 3348117

Genuine Whirlpool OEM replacement agitator assembly/kit for top-load washers. The agitator mounts to the transmission drive shaft and provides mechanical wash agitation. The official Whirlpool parts listing identifies it as a replacement agitator kit.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Washer will not agitate
• Agitator spins freely or slips during the wash action
• Poor or incomplete wash movement
• Spinning-related operation issues associated with a failed agitator assembly
• Marks left on clothes when the agitator assembly is damaged

Check Before Replacing

• Disconnect electrical power before inspection or service.
• With the washer empty and powered off, check whether the agitator turns unusually freely or slips relative to the drive shaft.
• Inspect the visible agitator for cracks, broken sections, or other physical damage.
• After removal, inspect the agitator’s internal drive interface and the transmission shaft splines for visible stripping or wear before installing the replacement.
• Confirm that the separate fabric-softener dispenser is not being mistaken for an included component; dispenser 8575076A is not included with this kit.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM agitator assembly/kit
• Designed for select Whirlpool and related-brand top-load washers and washer-dryer combinations
• Complete agitator assembly intended to restore mechanical wash action
• Fabric-softener dispenser is not included and must be ordered separately when required
• Manufacturer part number 285565 is documented by Whirlpool and established appliance-parts distributors

Installation Notes

• Disconnect power before servicing.
• Remove the agitator cap or fabric-softener dispenser to access the retaining bolt.
• Remove the retaining bolt and lift the agitator assembly straight up from the drive shaft; gently rock it side to side if it is difficult to remove.
• Before fitting the replacement, verify that the drive interface and shaft splines are not visibly damaged.
• Reinstall the retaining hardware and top components securely, then verify proper agitation with an appropriate test cycle.

Verified Compatible Models

1CLSQ9549PG0, 1CLSQ9549PG1, 1CLSQ9549PW0, 1CLSQ9549PW1, 1CLSR7010PQ0, 1CLSR7010PQ1, 1CLSR7333PQ0, 1CLSR7333PQ1, 1CLSR9434PQ0, 1CLSR9434PQ1, 1CLSR9434PT0, 1CLSR9434PT1, 1CWTW4800YQ1, 1CWTW4800YQ2, 1CWTW4845EW0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.