Frigidaire / Electrolux Range Element-Surface, Coil, 8 Inch 316281900

Genuine OEM 8-inch coil surface heating element for electric ranges. The element supplies heat to a cooking area on the top of the range.

Is This the Right Part?

Common Symptoms

• Burner does not heat
• Burner heats unevenly
• Burner may remain on or fail to regulate correctly

Check Before Replacing

• Disconnect electrical power to the range and allow the element to cool completely before inspection.
• Visually inspect the coil and terminals for visible breaks, scorching, deformation, or damaged contacts.
• With power disconnected, remove the element and check resistance across its terminals with a multimeter; an open or infinite reading indicates a broken heating circuit. A normal resistance reading alone does not rule out wiring, receptacle, or control-switch problems.
• Confirm that the element terminals are fully seated in the receptacle and that the receptacle and wiring show no visible melting or looseness.

Pro Tip

Part Details

Key Features

• Genuine Frigidaire OEM surface element
• 8-inch coil element
• 2,200-watt rating
• For electric range surface cooking
• Plug-in replacement design

Installation Notes

• Disconnect the range from electrical power at the plug or circuit breaker before servicing.
• Allow the surface element to cool completely before removal.
• Remove and install the element using its terminals and receptacle; do not pull on or damage the wiring.
• After installation, verify operation cautiously at the applicable heat settings and stop use if sparking, scorching, or abnormal heating occurs.

Verified Compatible Models

79091312010, 79091313012, 79091313013, 79091319011, 79091319013, CFEF3012LWA, FFEF3012LSD, FFEF3012LSE, FFEF3012LSF, FFEF3012LWC, FFEF3012LWD

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.