THE ASSOCIATED SURFACE BURNER DOES NOT HEAT
Frigidaire / Electrolux Range Element-Surface, Coil, 8 Inch 316281900, Fixes The associated surface burner does not heat
Genuine OEM 8-inch coil surface heating element for electric ranges. The element supplies heat to a cooking area on the top of the range.
Part 316281900Frigidaire / Electrolux
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part Number316281900
ManufacturerFrigidaire / Electrolux
Appliance TypeRange
Part TypeElement-Surface, Coil, 8 Inch
✅ Cross Reference Information
Current Part Number316281900
Common Symptoms
- Burner does not heat
- Burner heats unevenly
- Burner may remain on or fail to regulate correctly
Check Before Replacing
- Disconnect electrical power to the range and allow the element to cool completely before inspection.
- Visually inspect the coil and terminals for visible breaks, scorching, deformation, or damaged contacts.
- With power disconnected, remove the element and check resistance across its terminals with a multimeter; an open or infinite reading indicates a broken heating circuit. A normal resistance reading alone does not rule out wiring, receptacle, or control-switch problems.
- Confirm that the element terminals are fully seated in the receptacle and that the receptacle and wiring show no visible melting or looseness.
Pro Tip
If the element has continuity but the burner still does not heat, check the receptacle, wiring, and surface-element control circuit rather than assuming the element is defective.
Part Details
Part Number316281900
Part TypeElement-Surface, Coil, 8 Inch
ManufacturerFrigidaire / Electrolux
Appliance TypeRange
Primary FunctionProvides heat to an 8-inch cooking area on an electric range; specified as a 2,200-watt surface element.
Installation Notes
- Disconnect the range from electrical power at the plug or circuit breaker before servicing.
- Allow the surface element to cool completely before removal.
- Remove and install the element using its terminals and receptacle; do not pull on or damage the wiring.
- After installation, verify operation cautiously at the applicable heat settings and stop use if sparking, scorching, or abnormal heating occurs.
Verified Compatible Models
79091312010, 79091313012, 79091313013, 79091319011, 79091319013, CFEF3012LWA, FFEF3012LSD, FFEF3012LSE, FFEF3012LSF, FFEF3012LWC, FFEF3012LWD
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
All brand names are the property of their respective owners and are used for compatibility reference only.
