EXCESSIVE SHAKING OR MOVEMENT DURING THE SPIN CYCLE
LG Electronics Washer shock absorber / damper assembly 383EER3001G, Replaces 383EER3001A, 383EER3001F, 383EER3001H, 383EER3001L, Fixes Excessive shaking or movement during the spin cycle
Genuine LG washer suspension shock absorber (damper assembly) that absorbs vibration and movement of the outer washer tub.
Part 383EER3001GReplaces 383EER3001A, 383EER3001F, 383EER3001H, 383EER3001LLG Electronics
Genuine LG washer suspension shock absorber (damper assembly) that absorbs vibration and movement of the outer washer tub.
Is This the Right Part?
Part Number383EER3001G
Replaces383EER3001A, 383EER3001F, 383EER3001H, 383EER3001L
ManufacturerLG Electronics
Appliance TypeWasher
Part TypeWasher shock absorber / damper assembly
✅ Cross Reference Information
Current Part Number383EER3001G
Replaces383EER3001A, 383EER3001F, 383EER3001H, 383EER3001L
Common Symptoms
- Banging or thumping during spin
- Washer walking or moving from its position
- Excessive vibration during high-speed spin
- Drum or tub contacting the cabinet
Check Before Replacing
- Observe whether the vibration or banging is concentrated during spin rather than fill or drain.
- With the washer empty and unplugged, visually inspect accessible damper assemblies for detachment, visible damage, or abnormal looseness; do not operate the appliance with panels removed.
- Confirm that the washer is level and that the load is not simply uneven or severely overloaded before attributing the symptom to the damper.
- If the damper appears detached or damaged, compare the installed part number and physical configuration with 383EER3001G before ordering.
Pro Tip
Before replacing the damper, rule out an uneven load and an unlevel washer; those conditions can produce similar spin symptoms.
Part Details
Part Number383EER3001G
Part TypeWasher shock absorber / damper assembly
ManufacturerLG Electronics
Appliance TypeWasher
Primary FunctionAbsorbs and controls movement of the washer’s outer tub during operation, especially during spin, to reduce vibration and tub movement.
Cross References383EER3001A, 383EER3001F, 383EER3001H, 383EER3001L
Key Features
- Genuine LG washer damper/shock-absorber assembly
- Designed to control outer-tub movement and reduce spin vibration
- Exact part identity is documented as 383EER3001G
- Retailer documentation describes the service part as a damper or shock-absorber assembly
Installation Notes
- Disconnect electrical power before servicing the washer.
- Access and panel-removal requirements vary by washer model; use the model-specific service information rather than assuming a universal procedure.
- The documented replacement process involves removing the damper retaining pins, installing the replacement damper, and reassembling the washer before testing.
- Verify that all retaining pins and associated connections are fully seated before operating the appliance.
- If access, panel removal, or retaining-pin removal is uncertain, use a qualified appliance technician.
Verified Compatible Models
FH069FD6W, FH069FD7W, GCWL1069CD5, GCWL1069CS3, GCWL1069CS5, GCWL1069QD5, GCWL1069QS5, WD15SGS6, WD15WGS6, WD1451RD, WD1471RD, WD1477RD, WD1571RD, WD1577RD, WDE13890RD
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
