Refrigerator Not Sealing? Door Gasket 5304528903 – Fix Warm Fridge Fast

A failing door gasket lets warm air into your refrigerator, forcing the compressor to overwork and driving up energy costs. In most Frigidaire and Electrolux refrigerators, this is caused by a cracked, torn, or deformed door gasket. When it fails, the fridge struggles to hold temperature, food spoils faster, and frost builds up unevenly. ⚡ Common failure point in Frigidaire-built refrigerators. Part 5304528903 is the genuine OEM replacement that restores a proper airtight seal and returns your refrigerator to factory performance.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Your refrigerator powers on and the compressor runs normally
• ✔ The freezer compartment is maintaining temperature correctly
• ✔ The door closes fully and the hinges are not damaged
• ✔ Interior lighting and controls function as expected
• ✔ ONLY problem is warm temperatures, frost buildup, or a visibly damaged/loose door seal

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Refrigerator not cold enough — most common complaint, compressor runs constantly
• Visible gap or crack in the door seal
• Frost or ice buildup along the door frame or interior walls
• Condensation or moisture around the door edge
• Higher than normal energy bills — fridge working overtime to compensate
• Door gasket feels stiff, brittle, or pulls away from the door liner

✔ If these symptoms match, this is the most likely failed component in the system.

✔ In most cases, replacing this door gasket restores normal operation immediately.

📦 Part Details

• Part Number: 5304528903
• Type: Refrigerator Door Gasket / Door Seal Assembly
• Replaces: OEM direct-fit door gasket assembly — supersedes 241872513, 241872503, 297366800 (no modification required)
• Brands: Frigidaire, Electrolux, Kenmore

⚙️ Installation

Skill Level: EASY — 20–30 minutes. No need to disconnect power for this repair. Pull the old gasket away from the door liner starting at a corner, working around the perimeter; press the new gasket into the retaining channel firmly, ensuring all four corners are fully seated. If the new gasket has a slight set from packaging, use a hair dryer on low heat to soften it before installation for a cleaner fit.

✓ Compatible Models

Confirmed compatible with FFSS2615TS0, FFSS2615TS1, FFSS2615TS2, FFSS2615TS3, FFSS2615TS4, FFSS2615TS5, FFSS2615TS6, FFSS2615TS7, FFSS2615TS8, FFSS2615TS9, plus additional Frigidaire, Electrolux, and Kenmore models. Contact us to verify your model number before ordering.

💡 Pro Tip

✓ Model-Specific Repair Pages