Equivalent PartsCross-reference listings may have additional stockCheck Stock →
WASHER DOES NOT DRAIN OR DRAINS SLOWLY
LG Washer Drain Pump 5859EA1004G, Fixes Washer does not drain or drains slowly
Genuine LG washer drain-pump assembly that removes accumulated water during the drain portion of the wash cycle. LG documentation identifies it as a replacement drain pump for selected LG washing machines.
Part 5859EA1004GLG
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part Number5859EA1004G
🇺🇸 Matching U.S. Part Number5859EA1004P
ManufacturerLG
Appliance TypeWasher
Part TypeWasher Drain Pump
✅ Cross Reference Information
Current Part Number5859EA1004G
Common Symptoms
- Washer makes unusual noise while draining.
- Washer leaves water in the tub after the cycle.
- Water leaks from the drain-pump area.
- Washer displays a drain-related error such as OE, after the drain path has been checked.
Check Before Replacing
- Unplug the washer before inspecting the drain-pump assembly or associated hoses.
- Check the drain hose for kinks, compression, freezing, or improper positioning.
- Check and clean the applicable pump filter or debris path according to the washer’s instructions.
- Disconnect the drain hose from the household drain and run an appropriate drain or spin test to help distinguish a household drain blockage from a washer drainage problem.
- If safe access is provided by the model’s documentation, visually check the pump and hose path for foreign objects or obvious damage; do not disassemble the pump while energized.
Pro Tip
Before replacing the pump, clear the drain hose and applicable pump filter first, because a blockage can produce the same no-drain symptom as a failed pump.
Part Details
Part Number5859EA1004G
Part TypeWasher Drain Pump
ManufacturerLG
Appliance TypeWasher
Primary FunctionRemoves accumulated water from the washer during the drain portion of the wash cycle.
Installation Notes
- Disconnect electrical power before installation.
- Drain or manage residual water before disconnecting pump hoses to reduce spill risk.
- Reconnect the pump wiring and inlet/outlet hoses securely in their original locations.
- Confirm hose clamps and mounting hardware are properly reinstalled before testing.
- Use the appliance-specific service or installation instructions for access-panel removal and final testing.
Verified Compatible Models
Fitment reminder: Verified compatibility is maintained by the XPart Model Hub Network. Match the complete appliance model number before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM