Range Burner Not Heating or Cooking Unevenly? Triple Radiant Element MEE64286301 – Fix Cooktop Failure Fast

A triple radiant element that won't heat, heats only partially, or produces uneven temperatures across the large burner zone is one of the most disruptive LG range failures. In most LG smooth-top electric ranges, this is caused by a failed triple radiant surface element. When it fails, the large burner zone stops producing heat entirely or delivers inconsistent temperatures that make cooking unreliable. ⚡ High-wear component in LG LRE, LSE, LTE, and LSSE series electric ranges. Part MEE64286301 is the genuine OEM replacement that restores full, even triple-zone radiant heat with an exact factory fit.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Range powers on and other burner zones work normally
• ✔ Oven heating is unaffected — only the large surface element zone is the problem
• ✔ Power supply and breaker confirmed OK — range has full 240V power
• ✔ Surface element switch and wiring harness are intact — no burned connectors
• ✔ ONLY problem is the large triple radiant burner zone won't heat, heats partially, or heats unevenly

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Large surface burner won't heat at all — most common complaint
• Element glows red on only one ring or partial arc of the triple zone
• Burner heats unevenly — outer ring works but inner rings don't, or vice versa
• Element takes much longer than normal to reach temperature
• Visible crack, break, or burn mark on the element coil
• Burner trips the breaker when turned on at high heat

✔ If these symptoms match, this is the most likely failed component in the system.

✔ In most cases, replacing this triple radiant element restores full, even heat across all three zones immediately.

📦 Part Details

• Part Number: MEE64286301
• Type: Triple Radiant Surface Element (Smooth-Top Electric Range)
• Replaces: OEM direct-fit triple radiant element — supersedes MEE62704901 (no modification required)
• Brands: LG

⚙️ Installation

Skill Level: MODERATE — 30–45 minutes. Disconnect power at the breaker before beginning — this element operates at 240V. Remove the cooktop glass or surface access panel, disconnect the wiring harness from the failed element, and lift out the old assembly. Position the new MEE64286301 in the mounting bracket, reconnect the harness, and restore power to test all three heat zones before reassembling. Do not touch the element surface with bare hands — skin oils cause hot spots and premature failure.

✓ Compatible Models

Confirmed compatible with LG LRE, LSE, LTE, LSSE, LREL, LSEL, LCE, LDE, and UPSE series smooth-top electric ranges. Contact us to verify your model number before ordering.

💡 Pro Tip

LDE4415BD, LDE5415ST, LSEL6335F, LREL6325F, UPSE3024ST, LSE4615BM, LSSE3027ST, LSSE3030BD, LSE4615ST, LTE4815BD, LSSE3026ST, LSSE3029BD, LTE4815ST, LTE4815BM, LDE4415ST, LDE4415BD