Viking Range Corporation Range 0+4 Point Re-Ignition Spark Module PA020047

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• No spark at multiple burners when ignition is activated
• Intermittent sparking or intermittent burner ignition across affected burners
• Burner flames fail to automatically re-ignite after being blown out
• Clicking may occur without usable ignition at more than one burner

Check Before Replacing

• With the appliance controls off, visually compare whether the problem affects multiple burners rather than only one electrode.
• Check that burner caps and burner heads are clean, dry, and correctly seated before attributing the problem to the spark module.
• If installation or inspection is required, disconnect electrical power and shut off the gas supply first.
• After confirming the exact model and module configuration, verify that the module connectors appear fully seated and that wiring is not visibly loose or damaged; do not probe energized high-voltage outputs.

Pro Tip

Part Details

Installation Notes

• Disconnect appliance power and shut off the gas supply before installation.
• Handle the module and wiring carefully, and confirm connector seating before restoring power.
• Verify the replacement’s configuration against the removed module and the appliance model before installation.
• After installation, test the affected surface burners and confirm proper spark sequencing and re-ignition behavior.

Verified Compatible Models

12-01-06, 12-08-06, CVDSC365-4G, DGRT300, LVDSC365-4G, SVGIC305DSI, SVGRT300, VDSC305, VDSC307, VDSC365-4G, VDSC367, 09-01-06, CVDSC305 AFTER 12-01-06, CVDSC307 AFTER 12-08-06, LVDSC305 AFTER 12-01-06, LVDSC307 AFTER 12-08-06, SVDSC305 AFTER 12-01-06, VDSC367-4G AFTER 09-01-06

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.