Oven Door Damaged or Not Sealing? Samsung Door Assembly DG94-00707A — Restore Full Door Function Fast

A damaged, cracked, or non-sealing oven door is a safety hazard and kills cooking performance. In Samsung ranges, the door assembly is a common failure point — broken inner glass, bent hinges, or a damaged handle can make the oven unusable. When the door fails, heat escapes, cooking times increase, and the oven may not reach or hold temperature. ⚡ Common failure point in Samsung-built ranges and slide-in ranges. Part DG94-00707A is a complete certified pre-owned Samsung door assembly that restores full door function — including glass, handle, hinges, and sub-assembly — in a single swap.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Your Samsung range powers on and the oven heats normally
• ✔ The issue is isolated to the door — cracked glass, broken handle, bent hinges, or poor seal
• ✔ Your model number matches NE597R0ABSR or a compatible Samsung range
• ✔ ONLY problem is the door itself — not the heating element, thermostat, or control board

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Oven door glass cracked, shattered, or missing
• Door handle broken, loose, or detached
• Door hinges bent, seized, or not holding the door level
• Door not sealing properly — heat escaping around the edges
• Oven taking longer than normal to reach temperature

✔ If these symptoms match, this complete door assembly is the most direct fix — no sourcing individual components separately.

✔ In most cases, swapping the full door assembly restores normal oven operation immediately.

📦 Part Details

• Part Number: DG94-00707A
• Type: Complete Oven Door Assembly — Certified Pre-Owned
• Includes: Inner Door Glass (DG64-00092A), Middle Inner Door Glass (DG64-00133A), Door Handle Assembly (DG94-00686A), x2 Door Hinge Assemblies (DG94-00358A), Door Sub Assembly (DG94-00212B), Door Assembly (DG94-00063A)
• Replaces: DG94-00063A, DG94-00212B, DG94-00686A, DG94-00358A, DG64-00092A, DG64-00133A
• Brand: Samsung
• Condition: Certified Pre-Owned — inspected and verified

⚙️ Installation

Skill Level: MODERATE — 20–40 minutes. Disconnect power before servicing. Open the oven door fully, locate the hinge locks on both hinges and flip them to the locked position, then lift the door straight up and off. Reverse the process to install the new door assembly — align both hinges into the slots simultaneously and flip the locks back to the open position.

✓ Compatible Models

Confirmed compatible with NE597R0ABSR plus additional Samsung range models. Contact us to verify your model number before ordering.

💡 Pro Tip