Whirlpool Microwave door interlock switch; two-terminal, normally closed W10269458, Replaces W10211973, 8206347, 4393598, Fixes Microwave will not start or may stop shortly after starting because the control does not detect a properly closed door
Genuine Whirlpool OEM microwave door interlock switch. The switch prevents the microwave from operating when the door is open and is specified as a two-terminal, normally closed switch.
Genuine Whirlpool OEM microwave door interlock switch. The switch prevents the microwave from operating when the door is open and is specified as a two-terminal, normally closed switch.
Is This the Right Part?
Common Symptoms
- Microwave displays a door-open or close-door message when the door is closed.
- Microwave starts intermittently or stops after a few seconds.
- Microwave may fail to heat when the door is closed.
- Door-related operation may be inconsistent, especially when the door is closed with insufficient latch engagement.
Check Before Replacing
- With the appliance unplugged, inspect the switch body, actuator, terminals, and surrounding latch or switch-holder area for visible damage or looseness.
- Confirm the door closes fully and that the latch engages the switch actuator without excessive movement or misalignment.
- If qualified to perform electrical testing, disconnect the switch wiring and check continuity against the appliance service documentation, comparing the switch behavior with its specified normally closed configuration.
- Do not operate the microwave with the door open; after any interlock repair, proper door alignment and interlock operation should be verified before use.
Pro Tip
Part Details
Key Features
- Genuine Whirlpool OEM microwave door interlock switch.
- Two wire terminals.
- Normally closed contact configuration.
- Used in the microwave door-latch/interlock system.
- Listed for Whirlpool-family microwave applications, including Whirlpool, Maytag, KitchenAid, Amana, JennAir, and related brands.
Installation Notes
- Unplug the microwave before accessing or replacing the door switch.
- Install the replacement in the same switch position and preserve the original wire orientation.
- Do not substitute a normally open or three-terminal switch for this specified two-terminal normally closed part.
- Because microwave door shielding and interlock operation must be checked after replacement, service-technician installation or post-repair verification is recommended.
Verified Compatible Models
UMV1160CS2, WMH2175XVQ2, WMH2175XVQ3, WMH53520AS0, WMH53520AS1, YAMV1160VAB1, YAMV1160VAB2, YAMV1160VAB3, YAMV1160VAB4, YAMV1160VAB5, YAMV1160VAB6, YKMHC319ES0, YKMHS120EB0, YMMV4205DW0, YWMH31017AS0
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
