Whirlpool Corporation Range Hinge Receiver W10647259, Replaces 9760407, W10277006, W10289077, Fixes Oven door does not close squarely or smoothly
OEM oven-door hinge receiver/bracket that mounts to the range front frame and anchors the oven-door hinge arm. It is used on range/oven assemblies and may be installed on either door side where specified by the appliance design.
OEM oven-door hinge receiver/bracket that mounts to the range front frame and anchors the oven-door hinge arm. It is used on range/oven assemblies and may be installed on either door side where specified by the appliance design.
Is This the Right Part?
✅ Cross Reference Information
Common Symptoms
- Oven door will not close completely
- Door sits crooked or has uneven alignment
- Door binds, scrapes, or opens unevenly
- Visible cracking, bending, spreading, or wear at the hinge receiver/bracket
Check Before Replacing
- With the range cool and disconnected from power, visually inspect the receiver for cracks, bending, spreading, or looseness.
- Compare the suspect receiver with the opposite-side receiver for distorted geometry or abnormal movement.
- Check whether the hinge arm remains properly seated in the receiver when the door is opened and closed slowly; do not force the door.
- Inspect the door and hinge area for damage before replacing the receiver, since a bent door hinge can produce similar symptoms.
Pro Tip
Part Details
Key Features
- Genuine Whirlpool OEM hinge receiver/bracket
- Mounts to the range front frame
- Anchors the oven-door hinge arm
- Used on the specified left- or right-side assembly according to the appliance design
- Replacement part W10647259 is documented for range applications
Installation Notes
- Disconnect electrical power to the range before service and allow the appliance to cool.
- Support and remove the oven door according to the appliance-specific instructions before accessing the receiver.
- Access may require removing the storage drawer and the receiver’s mounting screws, depending on the range design.
- Before securing the replacement, verify that the receiver is oriented correctly and that the hinge arm seats properly.
- Reinstall and secure the oven door and confirm smooth, even opening and complete closure before returning the range to service.
Verified Compatible Models
WEG745H0FE0, WEG745H0FH0, WEG745H0FS0, WFC310S0ES1, WFE320M0AB0, WFE320M0AS0, WFE320M0ES0, WFE320M0ES1, WFE515S0EB1, WFE515S0ED1, WFE515S0ES1, WFE515S0ET1, WFE515S0EW1, WGE745C0FS01, WGG745S0FS02
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
