Whirlpool Dishwasher drain hose W11084165, Replaces W10651070

Genuine Whirlpool dishwasher drain hose. The hose carries wastewater from the dishwasher pump to the household drain; some listings describe the assembly as including a check valve.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Water remains in the dishwasher after a cycle when the hose is clogged or restricted.
• Slow or incomplete draining caused by a kinked, clogged, cracked, or damaged hose.
• Water leaks beneath or behind the dishwasher from a failed hose or connection.
• Wastewater can flow back into the tub if the check-valve function or drain-loop arrangement is compromised.

Check Before Replacing

• With the dishwasher de-energized, visually inspect the accessible hose and connections for cracks, kinks, abrasion, loose connections, or moisture.
• Check the hose routing for low points or sharp bends that could restrict flow; confirm the drain loop is routed according to the dishwasher's installation instructions.
• Inspect the sink, disposer, or air-gap connection for blockage before attributing a draining problem to the hose.
• If safe access is available, check the hose connection area for accumulated debris or signs of leakage; do not run the appliance with an active leak.
• Do not seal the drain hose connection in a way that prevents the required air gap or high-loop arrangement.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM dishwasher drain hose.
• Connects the dishwasher pump discharge to household drain plumbing.
• Drain-hose loop design from the pump toward the outside of the tank.
• Some listings identify the assembly as including a backflow-prevention check valve.
• Documented Whirlpool replacement for W10651070.

Installation Notes

• Disconnect electrical power to the dishwasher and shut off the water supply before installation.
• Follow the appliance-specific service or installation instructions for hose routing and connection points.
• Secure the drain hose to prevent it from moving, leaking, or pulling out of the drain connection.
• Maintain the required high loop or air-gap arrangement; do not create a sealed drain connection that can promote siphoning or backflow.
• After installation, check the hose and connections for leaks before returning the dishwasher to normal use.

Verified Compatible Models

665.14763N510, KDPM354GPS0, KDTM354ESS2, KDTM384ESS0, KDTM404EBL2, KDTM404EWH1, KDTM504EPA0, KDTM504EPA1, KDTM704EBS1, KDTM704EBS2, KDTM704ESS1, KDTM704ESS3, KDTM804EBS0, KDTM804ESS0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.