Whirlpool Range Dual Surface Burner Valve W11109973, Replaces W10432224

Genuine Whirlpool OEM dual surface burner valve that controls gas flow to a range surface burner. Sources identify it as a surface burner valve for the left-front burner on some applications.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Affected burner does not light even though other burners operate normally
• Weak or insufficient flame from the affected burner after basic burner-cap and port checks
• Flame does not respond normally to the control knob
• Gas odor or suspected leakage around the affected burner or valve area; shut off gas and discontinue use if this occurs

Check Before Replacing

• Confirm the control knob is pushed in and turned to the ignition position, and verify that the appliance gas shutoff valve is open.
• With the burner off and cool, verify that the burner cap is correctly seated and that visible burner ports are clean and unobstructed.
• Compare the affected burner’s flame response and output with another burner while observing normal gas-safety precautions; do not disassemble the valve or attempt to repair it.
• If gas odor is present, turn the burner and appliance gas supply off, ventilate the area, avoid sparks or flames, and contact a qualified appliance technician or gas professional.
• Before replacing the valve, verify the exact appliance model and burner location because W11109973 is application- and position-specific.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM surface burner valve
• Dual surface-burner valve design
• Documented for the left-front surface burner on some applications
• Regulates gas flow to the range surface burner
• Replaces previous Whirlpool OEM number W10432224

Installation Notes

• Shut off the appliance gas supply and unplug the range before service, as specified in the parts-service instructions.
• Allow the range and burner components to cool before handling, and use appropriate hand protection.
• Use the appliance’s model-specific service or installation documentation; valve location and access can vary by range design.
• After installation, check burner operation across the control range. The manufacturer’s installation guidance states that dual-valve adjustments must be performed by a qualified installer or service agency.
• If the burner does not light correctly, produces abnormal flame behavior, or gas leakage is suspected after service, shut off the gas and contact qualified service.

Verified Compatible Models

66475223710, 66475223712, KSDB900ESS0, KSDB900ESS1, KSDB900ESS2, KSDB900ESS3, KSDB900ESS4, KSDB900ESS6, KSDB900ESS8, KSDB900ESS9, KSGB900EBL0, KSGB900ESS0, KSGB900ESS1, KSGB900ESS2, KSGB900ESS3

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.