Whirlpool Corporation / JennAir Range Sliding Rack (Sliding Oven Rack) W11563568, Replaces W11111342, W11488688, W11491351

Full-extension sliding oven rack with ball-bearing glide mechanism for select JennAir 30-inch ranges. The rack provides a stable surface for cookware and slides in and out for easier access.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Rack binds or requires unusual force to extend or retract.
• Rack sits unevenly or does not remain properly supported.
• Rack slides forward without being pulled.
• Oven door may not close fully if the rack is mispositioned or not fully inserted.

Check Before Replacing

• With the oven cool, remove cookware and inspect the rack for visible bending, damaged glide components, corrosion, or debris.
• With the rack empty and the oven cool, move it slowly through its travel and compare the left and right sides for binding or uneven movement.
• Confirm the rack is seated correctly on both oven guides and is pushed completely into the oven before closing the door.
• If the rack moves forward by itself, verify that the guides and rack are correctly installed before replacing the rack.

Pro Tip

Part Details

Key Features

• Full-extension sliding oven rack.
• Ball-bearing glide mechanism.
• Stable surface for cookware.
• Stainless-steel metal construction.
• Designed for select JennAir 30-inch ranges.
• Factory Certified Accessory designation is listed by the product retailer.

Installation Notes

• Install only after the oven is completely cool and the rack is empty.
• Unplug the appliance or switch off the house circuit breaker before installation, as specified in the product information.
• Follow the model-specific JennAir instructions for removing and replacing the roll-out rack; use two hands when lifting the front edge of the rack and sliding shelf.
• After installation, confirm that the rack is seated on both guides, moves smoothly, and is pushed fully closed so the oven door can close.

Verified Compatible Models

JDRP430HL00, JDRP430HL01, JDRP430HM00, JDRP430HM01, JDRP548HL00, JDRP548HL01, JDRP548HM00, JDRP548HM01, JDRP648HL00, JDRP648HL01, JDRP648HM00, JDRP648HM01, JDRP748HL00, JDRP748HL01, JDRP748HM00

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.