Whirlpool Washer Lower wire harness / lower wiring harness (HARN LWR VMAX2.0W 4.8 VPUMP) W11590868, Replaces W11405459, Fixes Washer may fail to drain when the lower harness or its pump-circuit wiring is open, damaged, or intermittently connected
Genuine Whirlpool lower washer wiring harness assembly serving the 4.8 VMAX 2.0 drain-pump circuit. It connects internal washer components and restores electrical continuity when the harness is damaged or causes intermittent operation.
Genuine Whirlpool lower washer wiring harness assembly serving the 4.8 VMAX 2.0 drain-pump circuit. It connects internal washer components and restores electrical continuity when the harness is damaged or causes intermittent operation.
Is This the Right Part?
✅ Cross Reference Information
Common Symptoms
- Pump does not operate during drain
- Washer retains water or stops before completing the cycle
- Intermittent draining caused by damaged or loose lower-harness wiring
- Visible chafing, severed wires, pinched sections, or damaged connectors near the lower pump circuit
Check Before Replacing
- Disconnect electrical power before inspecting the harness.
- Visually inspect the lower harness routing for severed, pinched, chafed, or pulled wires, especially near the drain-pump area and the underside of the washer.
- Inspect harness connectors for loose engagement, bent terminals, corrosion, or visible heat damage.
- If appropriate test equipment and service documentation are available, check continuity of the affected circuit with power disconnected; do not use continuity testing on an energized appliance.
- Confirm that the drain pump itself and the pump hoses are not being mistaken for a harness fault.
Pro Tip
Part Details
Key Features
- Genuine Whirlpool OEM lower wire harness
- Designed for the VMAX 2.0 washer platform
- Serves the 4.8 VMAX 2.0 drain-pump circuit
- Manufacturer part number W11590868
- Distinct prior manufacturer number W11405459 is documented as replaced by W11590868
Installation Notes
- Disconnect power before handling or replacing the harness.
- Route the replacement harness exactly as the original, keeping it clear of moving parts, sharp edges, and pinch points.
- Ensure each connector is fully seated and secured in its original location before restoring power.
- When removing underside packaging, prevent the packaging from snagging the pump-harness routing.
- Use the appliance’s model-specific service documentation for access, connector locations, and final verification.
Verified Compatible Models
MVW6200KW1, MVW6200KW2, MVW6200KW3, MVW6200KW4, MVW6230HC1, MVW6230HC2, MVW6230HC3, MVW6230HC4, MVW6230HC5, MVW6230HW1, MVW6230HW2, MVW6230HW3, MVW6230HW4, MVW6230HW5, MVW6230RHW1
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
