Whirlpool Dryer Door Seal Gasket W11613302, Replaces W10823581, 3390734, W10465697, 6-85763, 685763-REPL, 685763, 339468, 239108, 234800, 231632, 21089, WP3390734

Genuine Whirlpool door seal gasket for dryers. It seals the perimeter around the dryer door to reduce heat loss.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Visible cracks, tears, separation, flattening, or sections of the seal pulling away from the door.
• A noticeable gap or weak contact between the closed dryer door and the seal.
• Heat or air escaping around the door during operation, which may reduce drying efficiency.
• The seal falling off or breaking into pieces, as reported for this exact part.
• Possible rubbing or noise if the seal is distorted or improperly seated.

Check Before Replacing

• Unplug the dryer before inspection or service.
• With the door open, visually inspect the entire seal for cracks, tears, missing sections, flattening, or separation from its mounting groove.
• Close the door and check that the seal contacts the door opening evenly around the perimeter, without obvious gaps.
• Inspect the seal and mating door area for lint, debris, or residue that could prevent full contact; clean only as permitted by the appliance instructions.
• If the seal is loose, damaged, or the door does not contact it evenly, compare the installation with the model-specific service information before replacing parts.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM door seal gasket.
• Fiberglass door-seal construction documented by parts distributors.
• Designed for Whirlpool and related-brand dryers listed in the trusted archive.
• W11613302 replaces the archived Whirlpool numbers, including W10823581, 3390734, W10465697, and WP3390734.
• Whirlpool’s parts listing identifies silicone sealant as a required part for completing the repair.

Installation Notes

• Disconnect electrical power before installation and wear protective work gloves.
• Remove the old seal carefully and clean the mounting/contact area before fitting the replacement.
• Seat the new gasket fully and evenly in the original mounting location; confirm there are no twists, folds, or gaps.
• Verify that the dryer door closes and contacts the seal evenly around the perimeter before operating the appliance.
• Follow the dryer model’s service instructions regarding sealant; Whirlpool’s W11613302 listing identifies silicone sealant as required to finish the repair.
• Do not operate the dryer if the replacement seal is loose, visibly damaged, or prevents the door from closing properly.

Verified Compatible Models

1LE4900XKW0, 1LE5700XKW0, 1LG5701XKW0, 3CE2110XMW1, 3CE2910XSN0, 3CE2910XSW0, 3CE2910XSW1, 3CEP2910DW0, 3CEP2920DW0, 3CEP2950DN0, 3CEP2950DW0, 3CEP2960DN0, 3CEP2960DN2, 3CEP2960DW0, 3CEP2960DW2, 3CFE2510W1, 3CG2901XSN0, 3CG2901XSN1, 3CG2901XSN3, 3CG2901XSW0, 3CG2901XSW1, 3CG2901XSW3, 3CGP2901DN0, 3CGP2901DW1, 3CGP2951BN0, 3CGP2951BW0, 3CGP2951DN0, 3CGP2951DW0, 3CGP2951DW1, 3LE5700XKW0, 3LE5710XKW0, 3LE5710XMW0, 3LE5710XMW1, 3LE5710XMW2, 3LE5710XMW3, 3LG5701XPW0, 3LG5701XSW0, 3LG5706XPW0, 3LTE5243BN0, 6CE2950XWN0, 7MLGR3624JQ3, 7MLGR3624JQ4, 7MLGR3624JT2, 7MLGR3624JT3, 7MLGR3624JT4, 7MWG44500ST0, 7MWG445500SQ0, 8LDR3422YG0, 8LDR3822DZ0, 8TLDR3822HQ0

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.