Whirlpool Dishwasher Drain Hose Assembly (Drain Hose ASM-GWS) W11614117, Replaces W11036159

Genuine Whirlpool dishwasher drain hose assembly that carries drain water from the dishwasher to the household drain/disposal connection.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Standing water remaining in the dishwasher after a cycle
• Slow or incomplete draining
• Water leaking from the hose, connections, or beneath the dishwasher
• Drain-related error or incomplete-cycle condition on models that monitor draining
• Drain odor associated with stagnant water or a restricted drain path

Check Before Replacing

• Disconnect electrical power before inspecting hose connections or accessing the dishwasher base.
• Visually inspect the exposed hose for kinks, splits, pinholes, abrasion, soft spots, or collapsed sections.
• Check the hose connections for looseness, visible leakage, or a hose end that no longer seals securely.
• Verify that the hose routing follows the appliance installation instructions, including the required high loop or air-gap arrangement where applicable.
• With the dishwasher empty and power restored only if appropriate for the model instructions, observe whether water exits freely during a drain operation; do not assume the hose is the cause because the drain pump, filter, or household drain may also be restricted.

Pro Tip

Part Details

Key Features

• Genuine Whirlpool OEM drain hose assembly
• Catalog description: Drain Hose ASM-GWS
• Designed for dishwasher wastewater drainage
• Replaces previous manufacturer number W11036159
• Sold under Whirlpool-family appliance applications

Installation Notes

• Confirm the appliance model and the hose routing before removal.
• Disconnect power and shut off the water supply before working inside or beneath the dishwasher.
• Route the replacement hose exactly as specified in the appliance installation instructions; maintain the required high loop or air-gap arrangement where applicable.
• Ensure each hose end is fully seated on its connector and that existing clamps or connection hardware are returned to their original positions.
• After installation, run a controlled cycle or drain operation and check the hose and both connections for leaks.

Verified Compatible Models

665.14869N120, 665.14875N120, BLB14GRANA2, JDPSG244LS2, JDPSS244LM0, JDPSS244PL1, JDPSS244PM0, JDPSS246LL1, JDPSS246LM0, KDFE104KBL1, KDFE104KBL2, KDFE104KPS2, KDFE104KWH2, KDFE104KWH3, KDFE105PPS0, KDFE204KBL3, KDFE204KBS0, KDFE204KBS1, KDFE204KBS2, KDFE204KPS1, KDFE204KPS2, KDFE204KPS3, KDFE304RBS0, KDTE104KPS0, KDTE204KBL2, KDTE204KBS3, KDTE204KPS1, KDTE204KPS2, KDTE204KWH2, KDTE204KWH3, KDTE304LPA0, KDTS324SPS0, MDFS3924RB0, WDPA70SAMZ0, WDPS7024RV0, WDT740SALW3, WDT740SALZ3, WDT750SAKV1, WDT750SAKV3, WDT750SAKW2, WDT750SAKW3, WDT751SAPZ0, WDT970SAKZ2, WDT970SAKZ3, WDTA50SAKB1, WDTA50SAKV0, WDTA50SAKV1, WDTA50SAKW0, WDTA50SAKW3, WDTA80SAKZ3

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.