DISHWASHER WATER DOES NOT HEAT PROPERLY AND DISHES REMAIN WET AFTER HEATED DRYING
GE Appliances Element Heating ASM / Dishwasher Heating Element WD05X24776, Fixes Dishwasher water does not heat properly and dishes remain wet after heated drying
Genuine GE dishwasher heating element assembly. The element heats wash water during the dishwasher cycle and assists with drying.
Part WD05X24776Replaces WD05X23763, WD05X21716, WD05X21294, WD05X10015GE Appliances
Guaranteed to Fit — or your money back.
Confirm your full appliance model number before ordering.
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberWD05X24776
ReplacesWD05X23763, WD05X21716, WD05X21294, WD05X10015
ManufacturerGE Appliances
Appliance TypeDishwasher
Part TypeElement Heating ASM / Dishwasher Heating Element
✅ Cross Reference Information
Current Part NumberWD05X24776
ReplacesWD05X23763, WD05X21716, WD05X21294, WD05X10015
Common Symptoms
- Poor cleaning because wash water is not heated adequately
- Dishes not drying properly
- Visible element damage, such as burn-through, warping, or scorching
- Possible leakage around the element terminal seals if the assembly or seals are damaged
Check Before Replacing
- Disconnect electrical power before inspection.
- After the dishwasher is completely cool, visually inspect the exposed heating element for burn-through, cracking, severe discoloration, warping, or foreign objects contacting it.
- Check whether the dishwasher is supplied with hot water and whether the selected cycle includes a heating or heated-dry phase.
- If qualified to perform electrical testing, test the element for continuity with power disconnected and the wiring removed; an open circuit indicates the element requires further service evaluation.
- Inspect the element terminals and connected wiring for loose, burned, corroded, or heat-damaged connections. Do not operate the dishwasher with damaged wiring or a visibly compromised element.
Pro Tip
A no-heat or poor-drying symptom is not conclusive proof that the element has failed; the control, wiring, temperature-sensing, water-level, or related safety components may also prevent heating.
Part Details
Part NumberWD05X24776
Part TypeElement Heating ASM / Dishwasher Heating Element
ManufacturerGE Appliances
Appliance TypeDishwasher
Primary FunctionThe dishwasher heating element heats wash water and assists the heated-dry portion of the cycle.
Installation Notes
- Disconnect electrical power to the dishwasher before beginning service.
- Allow the dishwasher and heating element to cool completely before handling.
- Remove the lower dish rack if needed to access the element from inside the tub.
- Disconnect the element wiring only after power is isolated, and inspect terminals for heat damage before reuse.
- Ensure the element is seated correctly and its terminal seals are properly positioned to avoid leakage.
- Restore power only after the element and wiring are securely installed; verify heating operation using the appliance’s normal or service-approved test procedure.
Verified Compatible Models
ADT521PGF4BS, ADT521PGF4WS, ADT521PGF6BS, ADT521PGF6WS, ADT521PGJ0BS, ADT521PGJ0WS, ADT521PGJ2BS, ADT521PGJ2WS, CDT706P2M4S1, CDT725SSF0SS, CDT725SSF4SS, CDT725SSF6SS, CDT725SSF7SS, CDT805P2N0S1, CDT835SMJ2DS
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
