GE Gas Range Burner Inner Brass Cap WG02L09621 — Fixes Uneven Flame / Restores Proper Ignition
🇺🇸 Matching U.S. Part Number: WB16X32876
Uneven flame or burner not lighting properly on your GE gas range? In most GE, Café, and Monogram gas ranges, this is caused by a failed or damaged inner brass burner cap. When it fails, the flame pattern becomes irregular, burners may not ignite consistently, or heat distribution across the cooking surface is compromised. ⚡ Common failure point in GE-built gas ranges and cooktops. Part WG02L09621 is the genuine OEM replacement that restores proper flame distribution and consistent ignition performance.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Appliance powers on and other burners work normally
- ✔ Gas supply is confirmed OK
- ✔ Igniter sparks but flame is weak, uneven, or won't hold
- ✔ ONLY problem is irregular flame pattern or poor ignition on one burner
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Burner flame is uneven or lopsided
- Burner won't ignite or takes multiple attempts
- Flame lifts off or blows out easily at low settings
- Visible cracks, chips, or carbon buildup on the brass cap
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing this inner brass cap restores normal burner operation immediately.
📦 Part Details
- Part Number: WG02L09621
- U.S. Equivalent: WB16X32876
- Type: Inner brass surface-burner cap (Item #302 in diagram)
- Replaces: WB16X32876, 164D9846P001, 4980921, AP6838137, PS12709898, EAP12709898, PD00079242
- Brands: GE, Café, Monogram
Check the burner cap seal and outer burner cap at the same time — if the inner cap has failed, the outer cap and igniter electrode are often worn as well. Replacing them together avoids a repeat service call.
⚙️ Installation
Skill Level: EASY — 10–15 minutes. Disconnect power and shut off gas before servicing. Remove the existing inner cap, clean the burner head of any debris or carbon buildup, and seat the new WG02L09621 cap firmly in place. No tools required for cap replacement.
✓ Compatible Models
Confirmed compatible with ZDP304NT1SS, ZDP364NDT1SS, ZDP366NT1SS, ZDP484NGT1SS, ZDP486NDT1SS, ZGP304NT1SS, ZGP364NDT1SS, ZGP366NT1SS, ZGP486NDT1SS, ZGU364NDT1SS, ZGU364NDT2SS, ZGU366NT1SS, ZGU366NT2SS, ZGU36ESL2SS, ZGU36ESL3SS, ZGU36ESL4SS, ZGU486NDT1SS, ZGU486NDT2SS plus additional GE Monogram and Café models. Contact us to verify your model number before ordering.
💡 Pro Tip
Before installing the new brass cap, use a soft brush to clear any food debris or carbon from the burner ports. A clogged port will cause the same uneven flame symptoms even with a brand-new cap — 2 minutes of cleaning saves a repeat repair.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
