Microwave Grease Building Up? Aluminum Grease Filter WG02F05544 – Fix Ventilation Fast
When your over-the-range microwave stops venting properly or grease accumulates on the filter, the aluminum grease filter needs to be replaced. In most GE over-the-range microwaves, the grease filter is the first line of defence against airborne cooking grease — when it becomes clogged or damaged, ventilation efficiency drops and fire risk increases. ⚡ One of the most frequently replaced maintenance parts in GE over-the-range microwaves. Part WG02F05544 is the genuine OEM replacement that restores full grease filtration and ventilation performance with a direct factory fit.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Microwave powers on and heats normally
- ✔ Fan runs but ventilation seems reduced or greasy
- ✔ Existing filter is visibly clogged, bent, or damaged
- ✔ Filter dimensions match: 5-1/16" × 7-5/8" × 1/16"
- ✔ ONLY problem is poor grease filtration or blocked airflow through the filter
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Microwave vent fan running but not clearing smoke or steam effectively
- Visible grease buildup or discolouration on the filter mesh
- Grease dripping from the underside of the microwave during cooking
- Burning or smoky smell when using the vent fan
- Filter frame bent, broken, or tabs snapped off
- Routine maintenance replacement — recommended every 6–12 months with regular cooking
✔ If these symptoms match, this is the most likely failed or worn component in the ventilation system.
✔ In most cases, replacing this grease filter restores full ventilation performance immediately.
📦 Part Details
- Part Number: WG02F05544
- Dimensions: 5-1/16" × 7-5/8" × 1/16"
- Type: Aluminum mesh grease filter for over-the-range microwave
- Replaces: OEM direct-fit grease filter — supersedes WB06X10608 (no modification required)
- Brands: GE, GE Profile
If your microwave has a charcoal odour filter (used in recirculating mode), replace it at the same time — charcoal filters should be replaced every 6 months and cannot be cleaned. Replacing both together maximizes ventilation performance and eliminates cooking odours.
⚙️ Installation
Skill Level: EASY — 5 minutes. No tools required and no need to disconnect power. Slide or snap out the old filter from the underside of the microwave (tabs or a push-release mechanism hold it in place depending on model), slide the new WG02F05544 filter into the same slot until it clicks or seats flush, and confirm it is secure before use. Do not operate the microwave without the grease filter installed.
✓ Compatible Models
Confirmed compatible with CVM1655STC01, JVM1620WTC01, JVM1625STC01, JVM1630SPC01, JVM1630WFC01, JVM1630WFCB01, JVM1635SFC01, JVM1635SFCA01, JVM1635SFCB01, JVM1635STC01, JVM3160DF5WW, JVM3160RF1SS, JVM3160RF2SS, JVM3160RF3SS, JVM3160RF4SS, JVM3160RF5SS, PVM2188SJC01, PVM2188SLJC01, PVM9005SJ3SS, plus additional GE over-the-range microwave models. Contact us to verify your model number before ordering.
💡 Pro Tip
Aluminum grease filters can be hand-washed in hot soapy water or run through the dishwasher monthly to extend their life. However, once the mesh is bent, torn, or the frame tabs are broken, replacement is the only fix. Keeping a spare WG02F05544 on hand means zero downtime when it's time to swap — it's a $50 part that protects a $500+ appliance.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
