Menu
Microwave Not Venting Properly? Vent Grille WG02F11625 – Fix Steam Buildup & Blocked Airflow Fast
A cracked, broken, or missing microwave vent grille allows steam, grease, and cooking odours to escape directly into your kitchen instead of being channelled through the ventilation system. In most GE over-the-range microwaves, the vent grille covers the exhaust fan opening and directs airflow properly during cooking. When it breaks or goes missing, steam accumulates under the cabinet, grease deposits build up around the microwave exterior, and the ventilation system loses efficiency. ⚡ Common damage point from cleaning impacts and heat cycling in GE over-the-range units. Part WG02F11625 is the genuine OEM replacement that restores proper airflow direction, protects the exhaust fan, and returns your kitchen ventilation to full performance.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Microwave powers on and heats normally
- ✔ Exhaust fan runs and moves air
- ✔ Vent duct and filters are clear and unobstructed
- ✔ ONLY problem is the vent grille is cracked, broken, discoloured, or missing entirely
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Vent grille visibly cracked, snapped, or broken at the mounting tabs
- Steam and cooking odours escaping directly into the kitchen during use
- Grease buildup on the microwave exterior around the vent opening
- Grille discoloured, warped, or melted from heat exposure
- Grille rattling or vibrating during fan operation
✔ If these symptoms match, this is the most likely failed component in the system.
✔ In most cases, replacing this vent grille restores proper ventilation and eliminates steam and odour escape immediately.
📦 Part Details
- Part Number: WG02F11625
- Replaces: WB34X25642
- Type: Over-the-Range Microwave Vent / Exhaust Grille
- Brands: GE
- OEM: Genuine GE replacement part
⚠️ Recommended While Repairing:
While the grille is off, inspect and clean or replace the grease filters behind it. Clogged grease filters are the #1 cause of reduced ventilation performance and can cause the exhaust fan motor to overheat. If the filters are saturated or damaged, replace them at the same time.
While the grille is off, inspect and clean or replace the grease filters behind it. Clogged grease filters are the #1 cause of reduced ventilation performance and can cause the exhaust fan motor to overheat. If the filters are saturated or damaged, replace them at the same time.
⚙️ Installation
Skill Level: Easy — 5–10 minutes. No tools required in most cases. Disconnect power before servicing. Align the new vent grille with the exhaust opening on the front of the microwave, press firmly until the mounting tabs click into place, and verify the grille sits flush with no gaps. Restore power and run the exhaust fan to confirm proper airflow.
✓ Compatible Models
Confirmed compatible with select GE over-the-range microwave models. Contact us to verify your model number before ordering.
💡 Pro Tip
Check the Grease Filters Every 3 Months:
The vent grille protects the exhaust system, but the grease filters behind it do the real work. Most GE over-the-range microwaves have dishwasher-safe aluminum mesh filters that should be cleaned monthly and replaced annually. A clean filter keeps the fan motor running cool and extends the life of the entire ventilation system.
The vent grille protects the exhaust system, but the grease filters behind it do the real work. Most GE over-the-range microwaves have dishwasher-safe aluminum mesh filters that should be cleaned monthly and replaced annually. A clean filter keeps the fan motor running cool and extends the life of the entire ventilation system.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
