Menu
⚠ This part (WG04F07524) has been discontinued by the manufacturer and is no longer available (NLA). Please contact us to discuss alternative options.
GE Dryer Timer WG04F07524
OEM GE Part · No Longer Available (NLA) · Limited Used Stock
The WG04F07524 Dryer Timer is the genuine GE OEM timer assembly that coordinates a dryer's entire cycle — controlling when the drum runs, when the heater engages, and when the cycle ends. This CAM-driven timer advances through timed or automatic cycles and ensures the dryer shuts off at the correct point. Note: This part has been discontinued by GE and is no longer available new. We have limited used stock available while supplies last.
⚠️ Pro tip: Before ordering a used timer, confirm your dryer's symptoms point specifically to the timer — test the timer motor with a multimeter and check that the timer contacts are advancing. A faulty start switch or thermal fuse can mimic timer failure symptoms.
✓ Model-Specific Repair Pages
Don't see your model? Contact us — we can help identify compatible alternatives.
This part replaces 572D520P022 and WE4M279, and is compatible with GE, General Electric, Hotpoint, Kenmore, Westinghouse, Monogram, Café, Moffat, Profile, Sears, and McClary dryers. As this part is NLA, no aging discounts apply and no new stock will be ordered.
✓ Common Symptoms Fixed
Dryer won't advance through cycle · Dryer won't shut off at end of cycle · Dryer runs continuously · Cycle timing is erratic or inconsistent · Dryer stalls mid-cycle · Timer knob turns but nothing happens
✓ Key Features & Specifications
Genuine OEM GE dryer timer assembly · CAM-driven cycle control · Replaces WE4M279 and 572D520P022 · Compatible with GE, Hotpoint, Kenmore, and related brands · Part Number: WG04F07524 · Weight: 5 lbs · Status: NLA — discontinued by manufacturer
✓ Buying Options
Used: Pulled from a working unit. Tested prior to listing. This is the only condition available as new production has ceased. Sold as-is — contact us with any questions before purchasing.
✓ Replacement Part Numbers
WG04F07524 · WE4M279 · 572D520P022
✓ Installation Tips
Unplug the dryer before beginning. Access the timer by removing the control panel — typically secured by screws at the back or sides of the panel. Disconnect the wire harness from the old timer, noting wire positions or taking a photo before removal. Transfer the timer knob to the new unit, install, reconnect the harness, and reassemble the panel. Restore power and run a timed cycle to confirm operation. Total repair time: 20–30 minutes.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
