Whirlpool Direct-drive washer drain pump / water pump WP3363394, Replaces 21024, 3363394, 8235, 64076, 63347, 62516, 3352492, 3348015

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Water remains in the tub after the drain portion of the cycle.
• A leak appears near or beneath the pump area.
• The pump makes unusual buzzing or grinding noises during draining.
• The motor operates in the drain direction but little or no water moves.

Check Before Replacing

• Disconnect electrical power before inspecting the pump or hoses.
• Check the drain hose and household drain for an external blockage before condemning the pump.
• Inspect the pump inlet and hose connections for a sock, coin, lint, or other obstruction.
• With power disconnected, check for visible pump housing damage or leakage around the pump.
• If the pump is removed, inspect the impeller for obvious breakage or binding; do not apply power during this inspection.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power before beginning service.
• Expect residual water when disconnecting the pump hoses; use suitable precautions to contain it.
• Remove the two retaining clips, disconnect the pump hoses, and remove the pump from the motor shaft according to the appliance’s service instructions.
• Seat the replacement pump fully on the motor shaft and reinstall both retaining clips securely.
• Reconnect the hoses, reassemble the washer, and check the drain operation and pump area for leaks before returning the appliance to normal use.

Verified Compatible Models

10682872600, 110088732791, 11010202000, 11010202001, 1101050299, 11010502990, 11010502991, 11010852990, 11010852991, 11012202100, 11012502100, 11012852100, 11013202200, 11013212200, 11014102300

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.