Range Storage Drawer Won't Slide? Rear Drawer Glide WP8053334 – Fix Sticking or Derailed Drawer Fast

A range storage drawer that sticks, derails, or won't close flush is almost always caused by a cracked or broken rear drawer glide. In most Whirlpool, Kenmore, and Amana freestanding ranges, the rear glide is the plastic guide that keeps the drawer aligned on its track — when it breaks or wears through, the drawer drops at the back, binds on the frame, or falls out entirely. When it fails, the drawer becomes unusable and can scratch the range cabinet or floor. ⚡ Common failure point in Whirlpool-built freestanding ranges. Part WP8053334 is the genuine OEM replacement rear drawer glide that restores smooth, aligned drawer operation immediately.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Your range powers on and cooks normally — only the storage drawer is the issue
• ✔ The drawer slides in and out but catches, binds, or drops at the rear
• ✔ The front glides and drawer box are intact — only the rear guide is damaged
• ✔ ONLY problem is the drawer not sliding smoothly or sitting level on its track

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Storage drawer sticks or requires excessive force to open or close
• Drawer drops at the back when pulled out past halfway
• Drawer falls completely off the track when fully extended
• Visible crack or break on the rear plastic glide bracket
• Scraping or grinding noise when opening or closing the drawer
• Drawer sits unevenly — front flush but rear sagging

✔ If these symptoms match, this is the most likely failed component in the system.

✔ In most cases, replacing this rear drawer glide restores smooth, level drawer operation immediately.

📦 Part Details

• Part Number: WP8053334
• Type: Range Rear Storage Drawer Glide (Plastic Track Guide)
• Replaces: 8053334, 3195062 — no modification required
• Brands: Whirlpool, Kenmore, Amana, Roper, Crosley, Magic Chef

⚙️ Installation

Skill Level: Easy — 5–10 minutes. No tools required. Pull the storage drawer fully out of the range and set it on a flat surface. Locate the rear glide bracket on the back underside of the drawer box — snap or unclip the broken glide off and press the new WP8053334 into place until it clicks. Reinstall the drawer by aligning the rear glide with the track rail and sliding it in until it seats fully.

✓ Compatible Models

Confirmed compatible with GFE461LVB0, GFE461LVS0, GR395LXGQ0, GR396LXGQ0, GR399LXGQ0 plus additional Whirlpool, Kenmore, Amana, Roper, and Crosley freestanding range models. Contact us to verify your model number before ordering.

GFE461LVB0, GFE461LVB1, GFE461LVQ0, GFE461LVQ1, GFE461LVS0, GFE461LVS1, GFE461LVT0, GFE461LVT1, GFG461LVB3, GFG461LVQ3, GFG461LVS3, GFG461LVT3, GR395LXGB0, GR395LXGB1, GR395LXGB2, GR395LXGQ0, GR395LXGQ1, GR395LXGQ2, GR395LXGT2, GR395LXGZ0, GR395LXGZ1, GR395LXGZ2, GR396LXGB0, GR396LXGB1, GR396LXGB2, GR396LXGQ0, GR396LXGQ1, GR396LXGQ2, GR396LXGT2, GR396LXGZ0, GR396LXGZ1, GR396LXGZ2, GR399LXGB0, GR399LXGB1, GR399LXGB2, GR399LXGQ0, GR399LXGQ1, GR399LXGQ2, GR399LXGT1, GR399LXGT2, GR399LXGZ0, GR399LXGZ1, GR399LXGZ2, GR399LXHS0, GR399LXHS1

💡 Pro Tip