Whirlpool Motor Pulley, 60 Hz / Dryer Motor Pulley WP8066184, Replaces 8066184

Whirlpool OEM motor pulley mounted on the dryer motor shaft. It drives the belt that rotates the dryer drum.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Squealing, squeaking, or grinding near the motor area during drum rotation.
• Drive belt slipping or repeatedly coming off the motor pulley.
• Intermittent drum rotation or clunking during operation.
• Visible pulley wear, cracking, stripping, wobbling, or other damage.

Check Before Replacing

• Disconnect electrical power before inspection; shut off the gas supply as applicable.
• With the dryer powered off, inspect the motor pulley and belt for visible cracking, wear, misalignment, fraying, or belt residue.
• Manually rotate the drum and observe whether the belt tracks normally and remains engaged with the motor pulley and idler pulley.
• If the motor runs but the drum does not turn, check the belt and idler pulley along with the motor pulley; this symptom is not specific to the pulley alone.
• Do not operate the dryer with damaged, loose, or visibly misaligned drive components.

Pro Tip

Part Details

Key Features

• Whirlpool genuine OEM motor pulley.
• Specified for 60 Hz dryer applications.
• Mounts on the dryer motor shaft and supports the belt connection that drives the drum.
• Used across select Whirlpool-family dryer applications; verify the appliance model before ordering.
• Replaces archived Whirlpool number 8066184, consistent with the trusted prior record.

Installation Notes

• Disconnect electrical power before opening the dryer cabinet; shut off the gas supply on gas models when required by the appliance service procedure.
• Access to the motor pulley generally requires cabinet disassembly and removal or release of the drive-belt tension.
• Remove the belt from the motor pulley before removing the pulley from the motor shaft.
• Install the replacement pulley on the motor shaft according to the model-specific service instructions; thread direction and securing method can vary by motor design.
• Before reassembly, confirm that the belt is correctly routed around the drum, idler pulley, and motor pulley and that it tracks without rubbing.
• Reinstall all cabinet panels and reconnect wiring before restoring power; test the dryer only after the cabinet is fully reassembled.

Verified Compatible Models

1106012510, 10697502820, 11060012000, 11060012001, 11060012002, 11060022010, 11060172000, 11060172001, 11060172002, 11060182000, 11060202990, 11060212990, 11060222510, 11060222511, 11060232000

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.