Whirlpool Dryer Thermal limiter WP8572767, Replaces 8572767, Fixes Dryer runs but does not heat when the thermal limiter is open
Whirlpool OEM thermal limiter/thermal fuse used in dryers and washer-dryer combinations. It interrupts the heating circuit when an unsafe over-temperature condition occurs.
Whirlpool OEM thermal limiter/thermal fuse used in dryers and washer-dryer combinations. It interrupts the heating circuit when an unsafe over-temperature condition occurs.
Is This the Right Part?
✅ Cross Reference Information
Common Symptoms
- Dryer will not start if this limiter is part of the motor safety circuit.
- Dryer runs without heat when the limiter has opened the heating circuit.
- Dryer may stop operating after overheating.
- Drying performance may be affected if an overheating event is caused by restricted exhaust airflow.
Check Before Replacing
- Disconnect electrical power before testing or servicing.
- With the limiter disconnected from the circuit and at room temperature, check continuity across its terminals with a multimeter; a good limiter should show a closed circuit, while an open reading indicates it has opened.
- Inspect the dryer exhaust vent and airflow path for lint or blockage before replacing an opened limiter.
- Inspect the limiter terminals and nearby wiring for heat damage or loose connections.
- Do not bypass or jumper the thermal limiter; an open limiter can indicate an overheating condition that requires correction.
Pro Tip
Part Details
Key Features
- Genuine Whirlpool OEM thermal limiter.
- 89°C/195°F thermal rating documented by parts suppliers.
- Replaces Whirlpool part number 8572767.
- Used in both dryer and washer-dryer-combination applications listed for the exact part.
Installation Notes
- Disconnect power before installation.
- Use the appliance-specific service information to access the limiter and identify its exact location; the component may be located at the blower housing or near the heat source depending on the appliance design.
- Transfer the wires to the replacement limiter in the same configuration as the original and ensure the connections are secure.
- After installation, restore power and verify operation only after checking for obvious vent restrictions or heat-related damage.
Verified Compatible Models
3RAED3005TQ0, 3RLEQ8033SW1, 3RMED4905TW0, 3RMED4905TW1, 3XLER5437KQ5, 3XLER5437KQ6, 3XWED5705SW1, 3XWED5705SW2, LER3622PQ2, LTE5243DQ5, LTE5243DQ6, LTE5243DQ8, LTE5243DQ9, LTE5243DQA, LTE5243DQB
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
