Whirlpool Range oven burner igniter WP9782065

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Igniter glows but the gas burner does not light
• Little or no heat during baking
• Little or no heat during broiling
• Oven does not start its heating cycle
• Gas odor may occur if ignition is unsuccessful

Check Before Replacing

• With the appliance safely disconnected when handling components, inspect the igniter ceramic for cracks or physical damage.
• During a supervised heating cycle, observe whether the igniter glows; a glow without burner ignition does not by itself prove the igniter is defective.
• If qualified to perform electrical testing, check igniter continuity with power disconnected and follow the appliance service documentation; lack of continuity supports a failed igniter but does not exclude other faults.
• Confirm the igniter wiring and ceramic connectors are clean, secure, and undamaged before replacing the component.

Pro Tip

Part Details

Installation Notes

• Disconnect electrical power and shut off the appliance gas supply before servicing.
• Handle the ceramic igniter carefully because the ceramic body is brittle.
• Disconnect and reconnect the two igniter wire connections securely; verify the connector configuration matches the replacement and original wiring.
• Route the igniter leads through the oven wall without pinching, stressing, or contacting hot surfaces.
• After installation, reassemble all removed panels or shields and verify proper ignition in accordance with the appliance service instructions.

Verified Compatible Models

GW395LEGB5, GW395LEGB6, GW395LEGQ5, GW395LEGQ6, GW395LEGT5, GW395LEGT6, KGRC608LSS0, KGRC707LBL0, KGRC707LBS0, KGRC707LBT0, KGRC707LWH0, KGRT600HBL6, KGRT600HBL8, KGRT600HBL9, KGRT600HBT6

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.