Whirlpool Range Spark Module WPW10110491, Fixes Multiple surface burners fail to spark or ignite
Genuine Whirlpool OEM 4+0 filtered spark module that controls the spark used to ignite range surface burners. It is also listed for range/oven and cooktop applications.
Confirm your full appliance model number before ordering.
Is This the Right Part?
✅ Cross Reference Information
Common Symptoms
- No spark from several surface burners when burner knobs are turned on
- Weak or intermittent sparking across multiple surface burners
- Surface burners do not ignite even though gas is available and the burner electrodes and wires appear intact
Check Before Replacing
- With the appliance cool, observe whether the affected burner electrodes produce a spark when the appropriate knob is turned; do not touch the electrodes or wiring.
- If only one burner is affected, visually inspect that burner’s electrode, spark wire, burner-cap position, and burner ports before suspecting the module.
- If several burners are affected, inspect the spark-module connectors and wiring for loose, disconnected, or visibly damaged connections after disconnecting electrical power.
- Confirm that the burner caps and heads are correctly positioned and dry; a misaligned, wet, or obstructed burner can prevent ignition independently of the module.
- Do not replace the module solely from a no-ignition symptom; model-specific service information should be used to distinguish the module from the electrode, wiring, switch, power, or gas supply.
Pro Tip
Part Details
Installation Notes
- Disconnect electrical power and shut off the gas supply before accessing or servicing the ignition system.
- Use the appliance’s model-specific service information to confirm the replacement before installation.
- Label or photograph each wire and connector before removal, then transfer connections to the corresponding terminals; wiring errors can cause improper or unsafe operation.
- Do not bypass unused terminals or alter the wiring unless the model-specific documentation explicitly permits it.
- After reassembly, restore utilities and verify normal ignition and burner operation; stop and obtain qualified service if gas leakage, abnormal sparking, or wiring damage is found.
Verified Compatible Models
YKDRS807SS00, KGRC608LSS0, KDRP463LSS0, KDRP462LSS0, KGCC506RBL00, AGR6303MFS0, GLT3057RQ05, WFG510S0AW2, WEG515S0FS0, MGC7630WB00, MGC7630WW00, G7CG3064XB00, G7CG3064XS00, SCS3017RQ04, SCS3617RQ05
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
