DRYER DRUM DOES NOT TURN
Whirlpool Dryer Drum Belt WPW10136934, Replaces W10136934, Fixes Dryer drum does not turn
Genuine OEM 5-rib axial dryer drum/drive belt. The belt attaches to the motor pulley and rotates the dryer drum.
Part WPW10136934Replaces W10136934Whirlpool
Genuine OEM 5-rib axial dryer drum/drive belt. The belt attaches to the motor pulley and rotates the dryer drum.
Is This the Right Part?
Part NumberWPW10136934
ReplacesW10136934
ManufacturerWhirlpool
Appliance TypeDryer
Part TypeDryer Drum Belt
✅ Cross Reference Information
Current Part NumberWPW10136934
ReplacesW10136934
Common Symptoms
- Drum does not rotate while the dryer motor may run.
- Drum turns unusually easily by hand when the belt is broken or disconnected.
- Squealing or other operating noise associated with a worn or damaged belt.
Check Before Replacing
- Disconnect electrical power before inspection or service.
- With power disconnected, rotate the drum by hand and note whether it turns unusually freely; this is only an indication and does not by itself confirm belt failure.
- Following the model-specific service instructions, inspect the belt for breakage, fraying, glazing, slackness, or displacement from the drum and pulley path.
- If the belt is damaged, also visually inspect the idler and motor pulley for obvious binding or damage before installing the replacement.
Pro Tip
A failed belt may be accompanied by wear or binding in the idler or motor-pulley area; inspect those components before reassembly so the replacement belt is not subjected to abnormal tension or friction.
Part Details
Part NumberWPW10136934
Part TypeDryer Drum Belt
ManufacturerWhirlpool
Appliance TypeDryer
Primary FunctionTransfers motor rotation to the dryer drum through the motor pulley, idler/tension path, and drum circumference so the drum can rotate during a drying cycle.
Cross ReferencesW10136934
Key Features
- Genuine Whirlpool OEM dryer drum/drive belt.
- 5-rib axial belt design.
- Connects the dryer drum to the motor for drum rotation.
- Listed for Whirlpool and Maytag dryer applications.
- Archived prior number W10136934 is documented as replaced by WPW10136934.
Installation Notes
- Disconnect electrical power before installation.
- Use the model-specific service instructions because cabinet access and belt routing vary by dryer model.
- Route the belt with the ribbed side engaging the appropriate drum surface and pulley grooves, matching the original routing shown in the service documentation.
- After installation and before normal use, verify that the belt tracks correctly and that the drum rotates freely by hand with power disconnected.
Verified Compatible Models
7MMGDB850WL0, 7MMGDB850WL1, 7MMGDB950AG0, 7MMGDB950AG1, MEDB200VQ0, MEDB200VQ1, MEDB400VQ0, MEDB400VQ1, MEDB700BW0, MEDB700VQ0, MEDB725BW0, MEDB750YW0, MEDB750YW1, MEDB750YW2, MEDB800VB0
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
