Whirlpool Washer Lint filter / drain pump filter WPW10215093, Replaces W10215093

Whirlpool OEM washer filter described as a lint filter and drain pump filter located at the outer-tub inlet. It traps lint and debris from drain water.

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• Lint or debris remains on washed clothing.
• Standing water remains in the tub after the drain portion of a cycle.
• Slow drainage or repeated drain-related symptoms may occur when the filter or connected drain path is obstructed.
• Rattling or unusual noise during draining may occur if foreign objects are present in the drain-pump filter area.

Check Before Replacing

• Disconnect power before inspection or service.
• If the model provides access to this filter, inspect it for lint, residue, coins, buttons, glass, or other foreign objects.
• Drain retained water into a suitable shallow container before removing an accessible filter; use towels to manage spills.
• Rinse removable lint and residue from the filter with water and inspect the filter for cracks, damage, or deformity.
• Check the washer drain hose and pump area for obvious kinks or blockages before concluding that the filter is defective.
• Do not treat a clogged filter as proof that the drain pump itself has failed; verify the filter, hose, and pump area separately.

Pro Tip

Part Details

Key Features

• Whirlpool OEM washer filter.
• Also described as a lint filter, drain pump filter, or drain-pump clean-out filter.
• Located at or near the outer-tub inlet / drain-pump path, depending on the washer design.
• Designed to trap lint and small foreign objects from drain water.
• Prior manufacturer documentation identifies W10215093 as the previous number for WPW10215093.

Installation Notes

• Use the appliance model's service or repair instructions because access varies; some top-load designs require removal of the agitator or washplate and inner basket to reach the filter.
• Disconnect electrical power and remove or drain retained water before accessing the filter.
• Expect residual water when the filter or connected drain path is opened; protect the floor with towels and a suitable container.
• Clean the mounting area and confirm the replacement filter is seated securely and is not damaged before reassembly.
• After installation, verify that the filter and surrounding drain path do not leak and that the washer drains normally.

Verified Compatible Models

110.20022010, 110.20022011, 110.20022012, 110.20022013, 110.20022014, 110.20102310, 110.20112310, 110.20112311, 110.20232711, 110.20232712, 110.20242510, 110.20242511, 110.20362810, 110.20362811, 110.20362812, WTW4915EW1, WTW5000DW1

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.