Menu
Range Burner Dead or Heating Unevenly? Fix Radiant Surface Element WPW10251108 Fast
An 8-inch burner that produces no heat, heats unevenly, or glows only partially has a failed radiant surface element. In most Whirlpool, KitchenAid, and Maytag ceramic glass cooktop ranges, the radiant surface element is the 3200W coil embedded beneath the glass that converts electricity into heat — when it burns out or cracks, the burner goes dead or delivers inconsistent temperatures. ⚡ Common failure point in Whirlpool-built smooth-top electric ranges. Part WPW10251108 is the genuine OEM replacement (supersedes W10251108) that restores full 3200W heating performance to your 8-inch burner immediately.
❓ Is This the Right Part?
This is the correct fix if ALL of the following are true:
- ✔ Your range powers on and other burners work normally
- ✔ The infinite switch (burner knob) for this burner is confirmed functional
- ✔ The burner terminal block and wiring connections are intact
- ✔ Your cooktop has a ceramic glass surface (smooth-top, not coil burners)
- ✔ ONLY problem is no heat or uneven/partial glow on the 8-inch burner position
Not sure? Send us your model number — we’ll confirm before you order.
🔧 Common Symptoms
- 8-inch burner completely dead — no glow, no heat at any setting
- Burner glows only on one side or in a partial arc
- Burner heats unevenly — hot spots and cold spots across the surface
- Burner takes much longer than normal to reach temperature
- Visible crack or dark burn mark visible through the glass cooktop surface
- Burner works intermittently — sometimes heats, sometimes doesn’t
✔ If these symptoms match, the radiant surface element is the most likely failed component in the system.
✔ In most cases, replacing this surface element restores full burner performance immediately.
📦 Part Details
- Part Number: WPW10251108
- Type: Radiant Surface Element — 8 inch, 3200W, Ceramic Glass Cooktop
- Replaces: OEM direct-fit radiant element — supersedes W10251108 (no modification required)
- Brands: Whirlpool, KitchenAid, Maytag, Jenn-Air, Kenmore
⚠️ Recommended While Repairing:
While the element is out, inspect the infinite switch (burner knob control) for the same burner — a failing switch causes the same dead-burner symptoms and will burn out the new element prematurely. Replace both together if the switch shows any signs of heat damage or erratic behaviour.
While the element is out, inspect the infinite switch (burner knob control) for the same burner — a failing switch causes the same dead-burner symptoms and will burn out the new element prematurely. Replace both together if the switch shows any signs of heat damage or erratic behaviour.
⚙️ Installation
Skill Level: MODERATE — 30–45 minutes. Disconnect power at the breaker before beginning — this element operates at 240V. Remove the cooktop glass panel or access the element from below the range depending on your model, disconnect the element wire leads from the terminal block, and swap the element. Reconnect leads securely — a loose terminal connection causes arcing that will damage the new element and the glass surface.
✓ Compatible Models
Confirmed compatible with MER8600, MER8650, MER8700, MER8770, MER8772, MER8775, MER8800, MER8850, MES8800, MES8880, MET8720, MET8776, MET8800, MET8820, JES1450, JES1750, KCED600, KCED606, KECC604, KECC664, KERS303, KERS306, KFED500, KFES530, KSEB900, KSEG700, KSEG950, WEE760, WFE524, WFE714, WFE720, WGE755 series and additional variants. Contact us to verify your model number before ordering.
💡 Pro Tip
💡 Pro Tip — Confirm the Switch Before You Order:
Before replacing the element, test the infinite switch by swapping the burner knob with a working same-size burner on the same range. If the dead burner comes to life with the working switch, you need a switch — not an element. If the burner stays dead regardless of which switch controls it, WPW10251108 is your fix. This 5-minute test eliminates the most common misdiagnosis on smooth-top ranges.
Before replacing the element, test the infinite switch by swapping the burner knob with a working same-size burner on the same range. If the dead burner comes to life with the working switch, you need a switch — not an element. If the burner stays dead regardless of which switch controls it, WPW10251108 is your fix. This 5-minute test eliminates the most common misdiagnosis on smooth-top ranges.
MER8700DS0, MER8800FZ0, KSEG700ESS0, KSEB900ESS0, JES1450FS1, JES1750FS0, KFED500ESS00, WEE760H0DS0, WGE755C0BS00, MET8800FZ00
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM
- Choosing a selection results in a full page refresh.
