Whirlpool Range/Stove/Oven Dual surface element control switch WPW10312185, Replaces W10312185

Is This the Right Part?

✅ Cross Reference Information

Common Symptoms

• The element will not heat or turn on.
• The element remains at full heat despite lowering the control.
• Heat level does not adjust normally.
• Only one section of the dual element operates.
• The element may fail to turn off normally.

Check Before Replacing

• Disconnect electrical power at the range/cooktop circuit breaker before inspection.
• With power disconnected, visually inspect the switch and wire terminals for loose connections, discoloration, melting, or burn damage.
• Confirm that the control knob is mechanically engaging the switch shaft and is not cracked or slipping.
• If qualified to perform electrical testing, compare switch continuity and operation with the appliance wiring diagram; do not test energized terminals unless trained and equipped to do so.
• Because the switch controls a dual element, separately verify the element and wiring before concluding that the switch is defective.

Pro Tip

Part Details

Installation Notes

• Turn off power at the circuit breaker before servicing.
• Access to the switch may require removal of the control-panel or cooktop access components, depending on the appliance model.
• Remove the knob and retain any model-specific trim, grommet, or insulating parts that must be transferred.
• Transfer wires to the corresponding marked terminals, using a photo or labels as a reference; do not rely solely on wire color.
• Secure the switch and reinstall removed panels and the knob before restoring power.
• After restoration of power, verify normal operation of both sections of the dual surface element.

Verified Compatible Models

G7CE3034XB00, G7CE3034XC00, G7CE3034XP00, G7CE3034XS00, G7CE3055XB00, G7CE3055XS00, G7CE3635XB00, G7CE3635XB01, G7CE3635XP00, G7CE3635XP01, G7CE3635XS00, G7CE3635XS01, KFED500EBL02, KFED500ESS02, KFED500EWH02

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.