Whirlpool Range Ignition Module / Spark Module WPW10331686, Replaces W10331686, 9758080R, 9758080, 8522964, 8273970, 8273977, 8273972, 8054084

Whirlpool OEM direct-spark ignition module, also described as a range spark module or module-SPK. The module controls ignition of gas range burners and oven burners.

Is This the Right Part?

Common Symptoms

• One or more gas burners fail to ignite consistently.
• The igniters click but no visible spark is produced.
• A burner lights and then goes out during the ignition sequence.
• Bake or broil ignition may fail or operate intermittently.
• Surface burners or oven burners may lack spark while gas supply is otherwise available.

Check Before Replacing

• With the range cool and the gas supply and electrical power off, inspect the module, wire harnesses, and terminals for loose, corroded, damaged, or contaminated connections.
• During a normal ignition attempt, observe whether a consistent spark is present near the applicable burner igniter; stop immediately if gas accumulates or a gas odor is detected.
• Use the appliance wiring diagram to verify the ignition circuit and check for an open circuit through the gas valve before condemning the module.
• If qualified to perform electrical testing, verify that the appliance is receiving the specified input voltage at the module according to the model-specific service documentation; do not probe live circuits unless trained.

Pro Tip

Part Details

Key Features

• Whirlpool OEM direct-spark ignition module.
• Combines the spark-module function with the ignition-control circuitry used by applicable Whirlpool-family gas ranges.
• Designed to generate consistent ignition spark for connected surface and oven burner igniters.
• Factory-certified replacement part for applicable models.

Installation Notes

• Disconnect electrical power to the range and shut off the gas supply before servicing.
• Access location varies by model and may be behind the rear console panel or front control panel.
• Document or transfer the wire connections from the old module one at a time to help preserve the original wiring arrangement.
• Remove the module’s mounting hardware, install the replacement in the original position, and reconnect the harnesses securely.
• Restore utilities only after all panels and connections are fully reassembled, then verify ignition operation according to the appliance instructions.

Verified Compatible Models

AGR5630BDB0, AGR5630BDS0, AGR5630BDW0, AGR5844VDB2, AGR5844VDB3, AGR5844VDB4, AGR5844VDD2, AGR5844VDD3, AGR5844VDD4, AGR5844VDS2, AGR5844VDS3, AGR5844VDS4, AGR5844VDW2, AGR5844VDW3, AGR5844VDW4

Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.