Whirlpool Corporation Washer Washing machine drain pump assembly WPW10661045, Replaces W10661045, W10215134, W10614033, Fixes Washer will not drain
OEM washing-machine drain pump assembly used to remove wastewater during the drain portion of the wash cycle. Also described as a top-load washer drain pump or pump-water.
OEM washing-machine drain pump assembly used to remove wastewater during the drain portion of the wash cycle. Also described as a top-load washer drain pump or pump-water.
Is This the Right Part?
✅ Cross Reference Information
Common Symptoms
- Water remains in the tub after the cycle
- Slow or incomplete draining
- Unusual humming, grinding, or other noise during draining
- Water leakage near the pump area
- Washer may stop during a cycle when draining is required
Check Before Replacing
- Disconnect power before servicing and check whether the external drain hose is kinked or obstructed.
- With power disconnected, inspect accessible pump hoses and connections for visible leaks, cracks, loose clamps, or obstructions.
- If the pump is accessed, check for foreign objects obstructing the pump or impeller; do not assume the pump is defective until other drain-path causes are excluded.
- After installation, run an appropriate test cycle and check that the washer drains normally and that hose and pump connections remain leak-free.
Pro Tip
Part Details
Key Features
- Genuine Whirlpool OEM washing-machine drain pump assembly
- Designed for top-load washer applications
- Located at the bottom of the washer
- Uses suction to draw wastewater from the tub and discharge it through the drain hose
- Replaces W10661045, W10215134, and W10614033
- Documented substitute/reference variant: WPW10661045VP
Installation Notes
- Unplug the washer and shut off the water supply before servicing.
- Be prepared for residual water when disconnecting hoses.
- Access the pump from the bottom area of the washer according to the applicable model’s service instructions.
- Transfer the hose connections and electrical connector to the replacement pump only after confirming their original routing and secure attachment.
- Secure the pump and hose connections, restore the washer to its upright position, then check operation and inspect for leaks.
Verified Compatible Models
11022342510, 11022532510, 11026112310, CAW8350EW1, MVWC215EW1, NTW4516FW0, NTW4651BQ1, NTW4655EW0, WTW4616FW2, WTW4815EW0, WTW4815EW1, WTW4816FW0, WTW4816FW1, WTW4915EW1
Fitment reminder: Match the complete appliance model number, including suffix or revision where applicable, before ordering.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
