DOOR GAP OR AIR LEAKAGE BETWEEN THE FRENCH-DOOR PANELS
GE Refrigerator Door Mullion Rail, Black WR01A00388, Fixes Door gap or air leakage between the French-door panels
Black refrigerator door mullion rail also called a mullion articulation assembly, flipper assembly, or door mullion cover for a French-door refrigerator. It creates an airtight seal between the refrigerator doors.
Part WR01A00388Replaces 225D2316G003, WR17X12584, WR17M365GE
Confirm your full appliance model number before ordering.
Is This the Right Part?
Part NumberWR01A00388
Replaces225D2316G003, WR17X12584, WR17M365
ManufacturerGE
Appliance TypeRefrigerator
Part TypeRefrigerator Door Mullion Rail, Black
✅ Cross Reference Information
225D2316G003, WR17X12584, WR17M365
Common Symptoms
- Refrigerator doors do not close or seal properly at the center mullion.
- Warm air may leak through the center door seam, potentially contributing to a refrigerator compartment that is too warm.
- The mullion may remain folded outward, fail to rotate into position, or interfere with door closing.
- Condensation or moisture may appear on the mullion when the flap does not seat correctly or when ambient humidity is high.
Check Before Replacing
- With power disconnected, visually inspect the mullion for cracks, warping, loose mounting, or a broken hinge or spring.
- Open and close the left refrigerator door slowly and observe whether the mullion folds inward when open and rotates into the sealing position when the door closes.
- Check that the mullion is not folded outward before closing the doors and that it contacts the opposing door evenly.
- Inspect the center door seam for a continuous gap and check the surrounding door gasket for obvious twists, tears, or obstructions.
- Confirm that food containers or door contents are not preventing either door from closing; do not force the doors or mullion.
Pro Tip
Before replacing the assembly, check door alignment and the mullion's top guide/striker path; a misaligned door or obstructed guide can prevent the flap from rotating and sealing even when the mullion itself is intact.
Part Details
Part NumberWR01A00388
Part TypeRefrigerator Door Mullion Rail, Black
ManufacturerGE
Appliance TypeRefrigerator
Primary FunctionRotating, spring-loaded mullion rail on a French-door refrigerator that forms the sealing surface between the closed refrigerator doors and helps limit warm-air leakage.
Installation Notes
- Disconnect refrigerator electrical power before handling or replacing the mullion assembly.
- Use the appliance-specific service or installation instructions because mounting details and electrical connections can vary by model.
- Typical replacement guidance for this style of assembly includes releasing the mounting screws, lifting the mullion from its upper and lower supports, disconnecting its wiring harness if present, then reconnecting the harness and securing the replacement in the same supports.
- After installation, verify that the mullion moves freely, folds inward with the door open, rotates into position when the door closes, and does not prevent the doors from sealing.
- Do not work on the wiring or heater circuit while the refrigerator is energized; obtain professional service if the wiring connector or door circuitry is damaged.
Verified Compatible Models
Fitment reminder: Verified compatibility is maintained by the XPart Model Hub Network. Match the complete appliance model number before ordering.
Buy Online Pick Up In-Store
Address
101 Trillium Dr
Kitchener, Ontario N2E 1W8
Kitchener, Ontario N2E 1W8
Phone
Hours
Mon–Fri 9 AM–5 PM • Sat 9 AM–1 PM