GE Refrigerator Ice Dispenser Auger Motor WR01F04997, Fixes Ice Not Dispensing
Your refrigerator may still make ice even though no ice comes through the dispenser. In many GE refrigerators, this can be caused by a failed ice-dispenser auger motor. When it fails, the auger cannot push cubes or crushed ice toward the dispenser chute. ⚡ A humming, clicking, or unusually noisy dispenser can also point to a weak or seized motor. Part WR01F04997 replaces WR01L10706 and restores power to the ice-bin auger.
❓ Is This the Right Part?
This is the correct repair candidate when all of the following are true:
- ✔ The refrigerator and ice maker otherwise operate normally
- ✔ Ice is present inside the storage bin
- ✔ The dispenser paddle or switch is being activated
- ✔ The auger does not turn, turns intermittently, or makes unusual noise
- ✔ The main problem is ice not moving through the dispenser chute
Not sure? Send us your model number — we'll confirm before you order.
🔧 Common Symptoms
- Ice maker makes ice but the dispenser will not dispense it
- Ice bin auger does not rotate
- Clicking, humming, or grinding from the dispenser area
- Intermittent ice dispensing
- Crushed or cubed ice remains trapped in the bin
- Auger motor stalls under load
✔ If these symptoms match, inspect the auger, coupling, ice bin, wiring, and dispenser switch before replacing the motor.
✔ In most cases, replacing the failed auger motor restores normal ice dispensing.
📦 Part Details
- Part Number: WR01F04997
- Type: Refrigerator ice-dispenser auger motor assembly
- Replaces: WR01L10706
- Brands: GE, GE Profile, Café and related GE-built refrigerators
Inspect the ice-bin auger, drive coupling, crusher blades, and wiring connector. A jammed bin or stripped coupling can overload a good replacement motor.
⚙️ Installation
Skill Level: Moderate — allow approximately 30–60 minutes. Disconnect electrical power before servicing. Remove the ice bin and dispenser-access components needed to reach the auger motor, transfer any reusable brackets or couplings, and reconnect the wiring exactly as originally installed. Confirm the ice-bin auger turns freely before reassembly.
✓ Compatible Models
Confirmed compatible with DFE24JYRBKFS, GFE26JEMNFDS, PFE24HYRBKFS, PYE18HYRBKFS. Contact us to verify your model number before ordering.
💡 Pro Tip
A frozen ice mass, damaged auger, stripped coupling, or jammed crusher blade can overload a good motor. Clear the obstruction and verify the auger turns freely before installing the replacement motor.
✓ Model-Specific Repair Pages
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
