Frigidaire Range Wire Harness WS01F00581 — Fixes No Power / Burner or Oven Wiring Failure
If your Frigidaire or Electrolux range has no power, a burner or oven that won’t respond, or intermittent electrical failures that can’t be traced to a single component, the main wire harness is the most likely cause. In most Frigidaire-platform ranges, the wire harness is the central electrical backbone — it routes power and control signals between the control board, surface burners, bake element, broil element, and all sensors. When it fails due to heat damage, rodent chewing, connector corrosion, or insulation breakdown, the range loses power to one or more systems unpredictably. ⚡ Common failure point in Frigidaire and Electrolux-built ranges. Part WS01F00581 is the OEM replacement harness that restores full electrical connectivity and reliable range operation.
Frigidaire Range WS01F00581
Is This the Right Part?
Confirm the complete model number before ordering. Similar parts may use different connectors, dimensions, hose positions, electrical ratings, or mounting points.
- ✔ Range receives power at the outlet — breaker is on and outlet tests OK at 240V
- ✔ Control board and individual components test functional in isolation
- ✔ Visible burn marks, melted insulation, or broken connectors found on existing harness
- ✔ ONLY problem is intermittent or complete loss of power to one or more range functions
- Range has no power — completely dead despite breaker being on
- One or more burners or oven functions intermittently stop working
- Burning smell or visible melted insulation near the harness routing
- Control board shows error codes that clear and return unpredictably
- Range works normally then loses power randomly — no consistent failure pattern
- Connector pins corroded or terminals burned at harness junction points
- Part Number: WS01F00581
- Type: Range Wire Harness / Main Wiring Harness
- Replaces: 318083023 — no modification required
- Brands: Frigidaire, Electrolux
- Condition: Used — inspected, connectors intact, no burn damage
Wire harnesses have multiple connectors that can look similar — before removing a single connector, photograph the entire harness routing from multiple angles. Pay special attention to connector orientation, color coding, and which terminal block each plug connects to. A 2-minute photo session before disassembly eliminates the most common wiring harness installation error: reversed or misrouted connectors that cause new failures after the repair.
Part Details
Use a qualified technician when diagnosis or installation is outside your experience. Gas parts should be installed by a licensed technician.
✅Compatibility & Cross Reference
Not sure about your model number? Call 1-877-899-7278 and we’ll help you confirm. All brand names are the property of their respective owners and are used for compatibility reference only.
Buy Online Pick Up In-Store
Kitchener, Ontario N2E 1W8
- Choosing a selection results in a full page refresh.
