Range Won't Ignite? Ignitor Glow Bar WS01F07251 – Fix Burner Ignition Failure Fast

If your GE Monogram or Café gas range burner won't light, clicks repeatedly, or produces a weak flame, the ignitor glow bar is the most common cause. In most GE-built gas ranges, the ignitor weakens over time and can no longer reach the temperature needed to ignite the gas. When it fails, the burner releases gas without lighting — a safety hazard and a frustrating repair. ⚡ Common failure point in GE Monogram and Café gas ranges. Part WS01F07251 is the genuine OEM replacement that restores fast, reliable ignition with a direct drop-in fit and no modifications required.

❓ Is This the Right Part?

This is the correct fix if ALL of the following are true:

• ✔ Your range powers on and runs normally
• ✔ Other burners or oven functions work correctly
• ✔ Gas supply to the range is confirmed on
• ✔ The ignitor glows dull red or not at all (not bright orange)
• ✔ ONLY problem is the burner won't light or ignition is delayed/weak

Not sure? Send us your model number — we'll confirm before you order.

🔧 Common Symptoms

• Burner won't light or takes multiple attempts — most common complaint
• Range clicks repeatedly but flame never appears
• Weak, uneven, or delayed flame at one or more burners
• Burner lights intermittently depending on temperature or humidity
• Gas smell without ignition — gas releasing but not lighting
• Ignitor glows dull red instead of bright orange

✔ If these symptoms match, the ignitor glow bar is the most likely failed component in the system.

✔ In most cases, replacing the ignitor glow bar restores normal ignition immediately.

📦 Part Details

• Part Number: WS01F07251
• Type: OEM Ignitor Glow Bar Assembly — genuine GE factory part
• Replaces: OEM direct-fit ignitor assembly — supersedes WB13K10040, WB13X25264, WS01F01193, 223C3381G038 (no modification required)
• Brands: GE Monogram, Café, GE

⚙️ Installation

Skill Level: EASY — 20–30 minutes. Shut off the gas supply and unplug the range before beginning. Remove the burner grate and cap, unscrew the ignitor from its mounting bracket, and disconnect the wire connector. Connect the new WS01F07251, secure the mounting screws, and reassemble the burner. Restore gas and power, then test each burner to confirm proper ignition. Do not overtighten the mounting screws — finger-tight plus a quarter turn is sufficient.

💡 Pro Tip

🔗 Model Repair Hubs

Find part lists, diagrams, and repair guides for your specific range model: ZGP304LR4SS, ZGP304LR5SS, ZGP304NR2SS, ZGP304NR4SS, ZGP304NR5SS, ZGP364LDN1SS, ZGP364LDR4SS, ZGP364LDR5SS, ZGP364NDN1SS, ZGP364NDR4SS, ZGP364NDR5SS, ZGP366LN1SS, ZGP366LR4SS, ZGP366LR5SS, ZGP366NN1SS, ZGP366NR5SS, ZGP486LDN1SS, ZGP486LDR3SS, ZGP486LDR4SS, ZGP486LDR5SS, ZGP486LRR4SS, ZGP486NDN1SS, ZGP486NDR4SS, ZGP486NDR5SS, ZGP486NRR4SS, CGY366P2M1S1, CGY366P3M1D1, CGY366P4M1W2

✓ Model-Specific Repair Pages